Problema con mac's de otros nodos... Permanece offline....

[ElCucoArg]

Hola... hasta hace unos dos días andaba yo con una mac de otro nodo con un sb5100i con firm original.....

ayer se me jodió ..... y probé otra mac de un nodo que no es el mio y con las dos me pasaba lo mismo

obtenia este log... mientras que el status permanecia 'offline'



2008-05-08 08:36:33 4-Error B301.8 Auth Reject - Permanent Authorization Failure
2008-05-08 08:36:33 7-Information D507.0 Retrieved Time....... SUCCESS
2008-05-08 08:36:33 7-Information D509.0 Retrieved TFTP Config Clancy1IP_Arris_1.1_BPI SUCCESS
2008-05-08 08:36:33 3-Critical I402.0 TLV-11 - Illegal Set operation failed
1970-01-01 00:00:32 7-Information D511.0 Retrieved DHCP .......... SUCCESS
1970-01-01 00:00:32 3-Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:26 7-Information T500.0 Acquired Upstream .......... SUCCESS
1970-01-01 00:00:26 7-Information T501.0 Acquired Downstream (573000000 Hz)........ SUCCESS
1970-01-01 00:00:25 3-Critical U002.0 UCD invalid or channel unusable
1970-01-01 00:00:23 3-Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:02 3-Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2008-05-07 07:57:19 3-Critical I402.0 TLV-11 - Illegal Set operation failed
1970-01-01 00:00:10 7-Information D511.0 Retrieved DHCP .......... SUCCESS
1970-01-01 00:00:10 3-Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:05 7-Information T500.0 Acquired Upstream .......... SUCCESS
1970-01-01 00:00:04 3-Critical R002.0 No Ranging Response received - T3 time-out
1970-01-01 00:00:03 7-Information T501.0 Acquired Downstream (573000000 Hz)........ SUCCESS
1970-01-01 00:00:03 3-Critical U002.0 UCD invalid or channel unusable
2008-05-07 07:53:28 4-Error B301.8 Auth Reject - Permanent Authorization Failure
2008-05-07 07:53:28 7-Information D507.0 Retrieved Time....... SUCCESS
2008-05-07 07:53:28 7-Information D509.0 Retrieved TFTP Config Clancy1IP_Arris_1.1_BPI SUCCESS
2008-05-07 07:53:28 3-Critical I402.0 TLV-11 - Illegal Set operation failed
1970-01-01 00:00:11 7-Information D511.0 Retrieved DHCP .......... SUCCESS
1970-01-01 00:00:11 3-Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:06 7-Information T500.0 Acquired Upstream .......... SUCCESS
1970-01-01 00:00:04 3-Critical R002.0 No Ranging Response received - T3 time-out
1970-01-01 00:00:04 7-Information T501.0 Acquired Downstream (573000000 Hz)........ SUCCESS
1970-01-01 00:00:04 3-Critical U002.0 UCD invalid or channel unusable
2008-05-07 02:03:35 3-Critical R005.0 Started Unicast Maintenance Ranging - No Response received - T3 time-out
2008-05-07 01:58:32 4-Error B301.8 Auth Reject - Permanent Authorization Failure
2008-05-07 01:58:32 7-Information D507.0 Retrieved Time....... SUCCESS
2008-05-07 01:58:32 7-Information D509.0 Retrieved TFTP Config Clancy1IP_Arris_1.1_BPI SUCCESS
2008-05-07 01:58:32 3-Critical I402.0 TLV-11 - Illegal Set operation failed
2008-05-07 01:58:21 4-Error D004.3 ToD request sent- No Response received
2008-05-07 01:58:19 7-Information D511.0 Retrieved DHCP .......... SUCCESS
2008-05-07 01:58:18 3-Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2008-05-07 01:58:15 3-Critical D002.0 DHCP FAILED - Request sent, No response
2008-05-07 01:57:59 3-Critical D001.0 DHCP FAILED - Discover sent, no offer received
2008-05-07 01:57:54 7-Information T500.0 Acquired Upstream .......... SUCCESS
2008-05-07 01:57:53 3-Critical R002.0 No Ranging Response received - T3 time-out
2008-05-07 01:57:53 7-Information T501.0 Acquired Downstream (573000000 Hz)........ SUCCESS
2008-05-07 01:57:53 3-Critical U002.0 UCD invalid or channel unusable
2008-05-07 01:57:49 7-Information Ô7954.9 DS channel override in rng-rsp, re-scanning downstream
2008-05-07 01:57:49 3-Critical R002.0 No Ranging Response received - T3 time-out
2008-05-07 01:57:49 7-Information T501.0 Acquired Downstream (567000000 Hz)........ SUCCESS
2008-05-07 01:57:49 3-Critical U002.0 UCD invalid or channel unusable
2008-05-07 01:57:47 3-Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2008-05-07 01:56:59 3-Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2008-05-07 01:56:58 3-Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2008-05-07 01:56:57 3-Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2008-05-07 01:56:57 3-Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2008-05-07 01:56:56 3-Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2008-05-07 01:56:56 3-Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2008-05-07 01:56:56 3-Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2008-05-07 01:56:55 3-Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2008-05-07 01:56:54 3-Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2008-05-07 01:56:54 3-Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing



Aclaro que mi mac origianl de mi nodo anada bien.....

Alguien sabe que puede ser?

saludos.

[juanma9876]

Buenas.
Tengo el mismo problema que tu. Tengo Motorola sb5100 con sigma 2x y con mac de otro nodo se queda offline, he probado con varias macs de otros nodos y sigue offline
Que le puede pasar

Salu2

[ElCucoArg]

HOla, De donde sos ?
yo estoy en Bs.AS.Argentina que iis tenés?

[ElCucoArg]

Aparentemtne se soluciona desactivando el bpi.... eso lo lei por ahi... todavía no lo puedo probar ya que estoy con firm original... despues pongo algun sigma x y lo pruebo... ahora estoy a full!

saludos

avisame juanma si te funciona

[juanma9876]

Gracias por contestar Cuco.
Soy de Cadiz, España.
Lo que no se como saber si tengo el dpi activada o no, y como desactivarlo.
He leido en un manuel como activarlo.

Salu2

[anibalG]

Para Argentina creo que no servirá desactivar el bpi por telnet, si es que es ese el sistema de seguridad (bpi+ que verifica colisión de m@cs con otros nodos). Tendrías que conseguirse una flash del 5100 con el bpi ya desactivado, para esos fines. Otra persona que conozca mejor los sistemas que usan en Argentina te podría orientar mejor, pero por lo que dices y lo que se ve en el log creo que es eso. Si tienes a mano un sb4200 prueba con el hackware v3B2 que bypassea el bpi+ y se conecta igual. Todo esto si no estan implementando certificados.

Para españa, solo necesitas una m@c de docsis1.0, de las que comienzan con caracteres específicos que se pueden buscar aquí en el foro. Allá usan certificados por lo que no sirve de nada bypassear el bpi+.


En todo caso esos son los comandos telnet.
cd \
cd non-vol
cd docsis
enable bpi false
write
write

Espero solucionen su problema