webstar cpc2100 bcm3348 muerto

[angeldmm]

no encuentro o no tiene el puerto para el blackcat
de que otro modo puedo cambiar el firm a este cablemodem?
Ahora mismo lo tengo con las 5 luces partadeando porque le intente cambiar la mac con el hiperterminal y meti demas la mano.
Alguna solucion a esto o es solo la basura

[serpor]

Ese modem cuando tiene la mac dada de baja se quedan todas las luces parpadeando,cuando le pones corriente empieza la secuencia de luces,hasta que se quedan parpadeando?si es asi,por el hyperterminal activale telnet y le cambias la mac por telnet o ya por hyperterminal

[angeldmm]

Cuando entro en el Hyperterminal no me acepta ningun comando.
Si paro el escaneo pero en eso me quedo y pones en los siguientes comandos:

CM> cd non_vol


Instance: ( 0 )Console Thread (0x807286e8)

Specified subtable ('non_vol') doesn't exist! Can't change to it...

Active Command Table: Cable Modem App Commands (CM-App)

[serpor]

Es cd non-vol

[angeldmm]

Esto es una copia de lo que sale por si sirve de algo:

BCM3348A1
1346890
MemSize: ......................... 8M
Flash detected @0xbe000000

Signature: e019


Broadcom BootLoader Version: 2.1.5 Gnu
Build Date: Aug 13 2003
Build Time: 17:35:07

Image 1 Program Header:
Signature: e019
Control: 0005
Major Rev: 0002
Minor Rev: 0000
Build Time: 2004/8/27 10:24:48 Z
File Length: 756386 bytes
Load Address: 80010000
Filename: EPC2100-v201r1142-0826.bin
HCS: 6573
CRC: 9640dd3f


HCS failed on Image 2 Program Header


Enter '1', '2', or 'p' within 2 seconds or take default...
. .

Performing CRC on Image 1...
Detected LZMA compressed image... decompressing...
Target Address: 0x80010000
...............
Decompressed length: 3932580

Executing Image 1...



3348
NFS client support not included.
usrRoot:usrNetInit: complete!

Hello... and welcome to the wonderful world of vxWorks!!


CmTargetLowLevelInit: Loading Flash/ProgramStore/NonVol drivers...
CmTargetLowLevelInit: Creating singletons for ProgramStore/BootloaderStore/NonV
ol devices...

Function: SetHardcodeVendorProfile

Got Attached ProfileRawData ok

Reading Permanent settings from non-vol...
Checksum for permanent settings: 0x7b13a5c

*
*
* One or more of the settings groups was upgraded.
*
*
Settings were read and verified.


Reading Dynamic settings from non-vol...
Checksum for dynamic settings: 0x1555cd1a
Settings were read and verified.

Attaching network interface lo0... done.

vvv Interface creation and driver startup beginning vvv

-> Begin DOCSIS CM WAN interface
Creating HAL object for the DOCSIS CableModem interface
Registering DOCSIS CableModem driver

INTC->RevID = 334800A1, MAX_US_QUEUES = 4, numUsQueuesConfigured = 4
-> End DOCSIS CM WAN interface

-> Begin Ethernet LAN interfaces
Creating HAL object for the Ethernet interface
Registering Ethernet driver
-> End Ethernet LAN interfaces

-> Begin USB LAN interface
Creating HAL object for the USB interface
Registering USB driver
-> End USB LAN interface

-> Begin IP Stack interfaces
-> Starting V2 DHCP Client subsystem...
Creating HAL object for IP Stack1 (MAC Addr=00:0f:21:23:7d:12)
Registering IP Stack1 driver

Creating HAL object for IP Stack2 (MAC Addr=00:0f:21:23:7d:14)
Registering IP Stack2 driver

IP Stack3 not enabled or failed to create and start interface; no other
stacks will be loaded.
-> End IP Stack interfaces

^^^ Interface creation and driver startup complete ^^^

Creating DOCSIS Control Thread...
Creating Propane Control Thread...
Propane version: 1.0.3 (30 Apr 2002)
Instantiating CmSnmpAgent object.
Initializing SNMP subsystem -- version = 93
Creating SNMP agent cablemodem agent
Creating the DOCSIS Forwarder...
Adding DOCSIS CableModem HalIf as the default interface to the DOCSIS Forwarde
r
Adding Ethernet HalIf to the DOCSIS Forwarder
Adding USB HalIf to the DOCSIS Forwarder
Adding IP Stack1 HalIf to the DOCSIS Forwarder
Adding IP Stack2 HalIf to the DOCSIS Forwarder

Starting SNMP subsystem

snmp-wm93Vendor CM Event Log initializing with stored events.
Creating SNMP agent CPE diag agent
SNMP startup complete.
kConsoleIsReadWrite
fpBridge is Not Null !!!
HTTP server initialization complete.
'The cubicle across from you is empty...go now!'

Scanning DS Channel at Starting Frequency : 633000000 Hz...

Type 'help' or '?' for a list of commands...

CM> Scanning DS Channel at Vendor NonVolSetting : 633000000 Hz...
Scanning DS Channel at Vendor NonVolSetting : 331000000 Hz...
Scanning DS Channel at 858000000 Hz...
Scanning DS Channel at 850000000 Hz...
Scanning DS Channel at 842000000 Hz...
Scanning DS Channel at 834000000 Hz...
Scanning DS Channel at 826000000 Hz...
Scanning DS Channel at 818000000 Hz...
Scanning DS Channel at 810000000 Hz...
Scanning DS Channel at 802000000 Hz...
Scanning DS Channel at 794000000 Hz...
Scanning DS Channel at 786000000 Hz...
Scanning DS Channel at 778000000 Hz...
Scanning DS Channel at 770000000 Hz...
Scanning DS Channel at 762000000 Hz...
Scanning DS Channel at 754000000 Hz...
Scanning DS Channel at 746000000 Hz...
Scanning DS Channel at 738000000 Hz...
Scanning DS Channel at 730000000 Hz...
Scanning DS Channel at 722000000 Hz...
Scanning DS Channel at 714000000 Hz...
Scanning DS Channel at 706000000 Hz...
Scanning DS Channel at 698000000 Hz...
Scanning DS Channel at 690000000 Hz...
Scanning DS Channel at 682000000 Hz...
Scanning DS Channel at 674000000 Hz...
Scanning DS Channel at 666000000 Hz...
Scanning DS Channel at 658000000 Hz...
Scanning DS Channel at 650000000 Hz...
Scanning DS Channel at 642000000 Hz...
Scanning DS Channel at 634000000 Hz...
Scanning DS Channel at 626000000 Hz...
Scanning DS Channel at Vendor NonVolSetting : 633000000 Hz...
Scanning DS Channel at Vendor NonVolSetting : 331000000 Hz...
Scanning DS Channel at 618000000 Hz...
Scanning DS Channel at 610000000 Hz...
Scanning DS Channel at 602000000 Hz...
Scanning DS Channel at 594000000 Hz...
Scanning DS Channel at 586000000 Hz...
Scanning DS Channel at 578000000 Hz...
Scanning DS Channel at 570000000 Hz...
Scanning DS Channel at 562000000 Hz...
Scanning DS Channel at 554000000 Hz...
Scanning DS Channel at 546000000 Hz...
Scanning DS Channel at 538000000 Hz...
Scanning DS Channel at 530000000 Hz...
Scanning DS Channel at 522000000 Hz...
Scanning DS Channel at 514000000 Hz...
Scanning DS Channel at 506000000 Hz...
Scanning DS Channel at 498000000 Hz...
Scanning DS Channel at 490000000 Hz...
Scanning DS Channel at 482000000 Hz...
Scanning DS Channel at 474000000 Hz...
Scanning DS Channel at 466000000 Hz...
Scanning DS Channel at 458000000 Hz...
Scanning DS Channel at 450000000 Hz...
Scanning DS Channel at 442000000 Hz...
Scanning DS Channel at 434000000 Hz...
Scanning DS Channel at 426000000 Hz...
Scanning DS Channel at 418000000 Hz...
Scanning DS Channel at 410000000 Hz...
Scanning DS Channel at 402000000 Hz...
Scanning DS Channel at 394000000 Hz...
Scanning DS Channel at 386000000 Hz...
Scanning DS Channel at Vendor NonVolSetting : 633000000 Hz...
Scanning DS Channel at Vendor NonVolSetting : 331000000 Hz...
Scanning DS Channel at 378000000 Hz...
Scanning DS Channel at 370000000 Hz...
Scanning DS Channel at 362000000 Hz...
Scanning DS Channel at 354000000 Hz...
Scanning DS Channel at 346000000 Hz...
Scanning DS Channel at 338000000 Hz...
Scanning DS Channel at 330000000 Hz...
Scanning DS Channel at 322000000 Hz...
Scanning DS Channel at 314000000 Hz...
Scanning DS Channel at 306000000 Hz...
Scanning DS Channel at 298000000 Hz...
Scanning DS Channel at 115000000 Hz...
Scanning DS Channel at 123000000 Hz...
Scanning DS Channel at 131000000 Hz...
Scanning DS Channel at 139000000 Hz...
Scanning DS Channel at 147000000 Hz...
Scanning DS Channel at 155000000 Hz...
Scanning DS Channel at 163000000 Hz...
Scanning DS Channel at 171000000 Hz...
Scanning DS Channel at 179000000 Hz...
Scanning DS Channel at 187000000 Hz...
Scanning DS Channel at 195000000 Hz...
Scanning DS Channel at 203000000 Hz...
Scanning DS Channel at 211000000 Hz...
Scanning DS Channel at 219000000 Hz...
Scanning DS Channel at 227000000 Hz...
Scanning DS Channel at 235000000 Hz...
Scanning DS Channel at 243000000 Hz...
Scanning DS Channel at 251000000 Hz...
Scanning DS Channel at 259000000 Hz...
Scanning DS Channel at Vendor NonVolSetting : 633000000 Hz...
Scanning DS Channel at Vendor NonVolSetting : 331000000 Hz...
cdScanning DS Channel at 267000000 Hz...
Scanning DS Channel at 275000000 Hz...
Scanning DS Channel at 283000000 Hz...
CM> cd Scanning DS Channel at 291000000 Hz...
Scanning DS Channel at 299000000 Hz...
Scanning DS Channel at 307000000 Hz...
Scanning DS Channel at 315000000 Hz...
dScanning DS Channel at 323000000 Hz...
Scanning DS Channel at 331000000 Hz...
Scanning DS Channel at 339000000 Hz...
oScanning DS Channel at 347000000 Hz...
Scanning DS Channel at 355000000 Hz...
cScanning DS Channel at 363000000 Hz...
Scanning DS Channel at 371000000 Hz...
Scanning DS Channel at 379000000 Hz...
Scanning DS Channel at 387000000 Hz...
Scanning DS Channel at 395000000 Hz...
Scanning DS Channel at 403000000 Hz...
Scanning DS Channel at 411000000 Hz...
Scanning DS Channel at 419000000 Hz...
Scanning DS Channel at 427000000 Hz...
CM> cd doc


Instance: ( 0 )Console Thread (0x807286e8)

Active Command Table: CM DOCSIS Control Thread Commands (docsis_ctl)

CM-App -> docsis_ctl

CM/DocsisCtl> Scanning DS Channel at 435000000 Hz...
Scanning DS Channel at 443000000 Hz...
Scanning DS Channel at 451000000 Hz...
Scanning DS Channel at 459000000 Hz...
Scanning DS Channel at 467000000 Hz...
Scanning DS Channel at 475000000 Hz...
Scanning DS Channel at 483000000 Hz...
Scanning DS Channel at 491000000 Hz...
Scanning DS Channel at 499000000 Hz...
Scanning DS Channel at Vendor NonVolSetting : 633000000 Hz...
Scanning DS Channel at Vendor NonVolSetting : 331000000 Hz...
Scanning DS Channel at 507000000 Hz...
Scanning DS Channel at 515000000 Hz...
Scanning DS Channel at 523000000 Hz...
Scanning DS Channel at 531000000 Hz...
Scanning DS Channel at 539000000 Hz...
Scanning DS Channel at 547000000 Hz...
Scanning DS Channel at 555000000 Hz...
Scanning DS Channel at 563000000 Hz...
Scanning DS Channel at 571000000 Hz...
Scanning DS Channel at 579000000 Hz...
Scanning DS Channel at 587000000 Hz...
Scanning DS Channel at 595000000 Hz...
Scanning DS Channel at 603000000 Hz...
Scanning DS Channel at 611000000 Hz...
Scanning DS Channel at 619000000 Hz...
Scanning DS Channel at 627000000 Hz...
Scanning DS Channel at 635000000 Hz...
Scanning DS Channel at 643000000 Hz...
Scanning DS Channel at 651000000 Hz...
sScanning DS Channel at 659000000 Hz...
Scanning DS Channel at 667000000 Hz...
Scanning DS Channel at 675000000 Hz...
Scanning DS Channel at 683000000 Hz...
cScanning DS Channel at 691000000 Hz...
Scanning DS Channel at 699000000 Hz...
aScanning DS Channel at 707000000 Hz...
Scanning DS Channel at 715000000 Hz...
Scanning DS Channel at 723000000 Hz...
Scanning DS Channel at 731000000 Hz...
Scanning DS Channel at 739000000 Hz...
Scanning DS Channel at Vendor NonVolSetting : 633000000 Hz...
nScanning DS Channel at Vendor NonVolSetting : 331000000 Hz...
_Scanning DS Channel at 747000000 Hz...
Scanning DS Channel at 755000000 Hz...
Scanning DS Channel at 763000000 Hz...
Scanning DS Channel at 771000000 Hz...
Scanning DS Channel at 779000000 Hz...
sScanning DS Channel at 787000000 Hz...
Scanning DS Channel at 795000000 Hz...
Scanning DS Channel at 803000000 Hz...
Scanning DS Channel at 811000000 Hz...
Scanning DS Channel at 819000000 Hz...
Scanning DS Channel at 827000000 Hz...
Scanning DS Channel at 835000000 Hz...
tScanning DS Channel at 843000000 Hz...
Scanning DS Channel at 851000000 Hz...
Scanning DS Channel at 859000000 Hz...
oScanning DS Channel at 111000000 Hz...
Scanning DS Channel at 117000000 Hz...
Scanning DS Channel at 123000000 Hz...
Scanning DS Channel at 129000000 Hz...
pScanning DS Channel at 135000000 Hz...
Scanning DS Channel at 141000000 Hz...
Scanning DS Channel at 147000000 Hz...
Scanning DS Channel at 153000000 Hz...
Scanning DS Channel at 159000000 Hz...
Scanning DS Channel at 165000000 Hz...
Scanning DS Channel at 171000000 Hz...
Scanning DS Channel at 177000000 Hz...
CM/DocsisCtl> scan_stop


Instance: ( 0 )DOCSIS Control Thread (0x805543f4)


CM/DocsisCtl> Scanning DS Channel at 183000000 Hz...
CM/DocsisCtl> cd..

Error - Unknown command: 'cd..'

CM/DocsisCtl> cd ..


Instance: ( 0 )Console Thread (0x807286e8)

Active Command Table: Cable Modem App Commands (CM-App)

CM-App

CM> cd non-vol


Instance: ( 0 )Console Thread (0x807286e8)

Specified subtable ('non-vol') doesn't exist! Can't change to it...

Active Command Table: Cable Modem App Commands (CM-App)

CM-App

CM> cd non


Instance: ( 0 )Console Thread (0x807286e8)

Specified subtable ('non') doesn't exist! Can't change to it...

Active Command Table: Cable Modem App Commands (CM-App)

CM-App

CM> cd /


Instance: ( 0 )Console Thread (0x807286e8)

Active Command Table: Cable Modem App Commands (CM-App)

CM-App

CM> cd non


Instance: ( 0 )Console Thread (0x807286e8)

Specified subtable ('non') doesn't exist! Can't change to it...

Active Command Table: Cable Modem App Commands (CM-App)

CM-App

CM> cd hal


Instance: ( 0 )Console Thread (0x807286e8)

Specified subtable ('hal') doesn't exist! Can't change to it...

Active Command Table: Cable Modem App Commands (CM-App)

CM-App

CM>

[angeldmm]

EStos sonlos pasos que sigo:

cd docsis o tambien cd doc
scan_stop

Para cambiar la mac
cd ..
cd non o cd nol-vol
cd hal o cd halif
mac_address 1 00:11:22:33:44:55 <-- Aqui poner la nueva mac
write

pero paro el escaneo y ya no me reconoce nada
gracias por molestaros con un pesao como yo

[serpor]

Para el scaneo y escribe:
cd / respeta en todos los casos las sepraciones,en eso fallas
cd non-vol
cd halif
mac_address 1 aa:bb:cc:dd:ee:ff

[angeldmm]

Te simbolizo con * los espacios y con + el intro y tu me dices que tal:
El escaneo lo paro bien y el cd*/ tambien pero
cd*non-vol+
y me sale esto:
Instance: ( 0 )Console Thread (0x807286e8)

Specified subtable ('non-vol') doesn't exist! Can't change to it...

Active Command Table: Cable Modem App Commands (CM-App)

cd*halif+ y tampoco me lo reconoce

mac_address*1*aa:bb:cc:dd:ee:ff+ y tampoco

no se si esta capado o algo por el estilo.....

[serpor]

De alguna maera tienes que activar los comados(Active Command Table: Cable Modem App Commands (CM-App)
Dale a help y mira a ver que te sale ahi

[angeldmm]

Perdon por la tardanza.
En help me sale esto:

CM/DocsisCtl> scan_stop


Instance: ( 0 )DOCSIS Control Thread (0x805543f4)


CM/DocsisCtl> Scanning DS Channel at 483000000 Hz...
CM/DocsisCtl> help


Instance: ( 0 )Console Thread (0x807286e8)

! ? REM cd dir
find_command help history instances ls
man pwd sleep system_time usage
----
ClearCmCert binarySfid bpiShow clear_image comp_mac_to_phy
comp_phy_to_mac copy_image dload dload_all dsdiag
dsx_show dump_flash goto_ds igmpShow ip_initialize
ip_show log_messages modem_caps rate_shaping_enable
rng_rsp scan_stop showFlows showconfig state
stop_download ucdShow ucddiag up_dis us_phy_oh_show
usdiag
----

CM/DocsisCtl>

[serpor]

Estas dentro del directorio DocsisCtl esos que as puesto son los comandos del directorio DocsisCtl,para salir del directorio pon cd / se te debe quedar asi CM>

[angeldmm]

si te fijas arriba tambien lo he hecho asi y el siguiente comando no lo reconoce....

[gnrx]

No, el comando help no lo has puesto en el directorio CM/>

Ponlo ahi donde te dice el compañero serpor y postea lo que indica.

Salu2.

[angeldmm]

creo que es esto lo que me pedis:

CM/DocsisCtl> cd /


Instance: ( 0 )Console Thread (0x807286e8)

Active Command Table: Cable Modem App Commands (CM-App)

CM-App

CM> help


Instance: ( 0 )Console Thread (0x807286e8)

! ? REM cd dir
find_command help history instances ls
man pwd sleep system_time usage
----
logout reset run_app shell version
writenonvol
----
[HeapManager] [docsis_ctl]

CM>

[serpor]

Tendras que subirle un temporal para poderle cambiar la mac y sin reiniciar el modem mira si en 1337 te deja activar telnet y entonces te vas a la consola de winsows te metes en telnet y lo activas y luego ya lo puedes reiniciar

[angeldmm]

No se que es montar el TFTP.
Creo que es un programa pero no estoy seguro.
En el tutorial eso se da por entendido y a lo mejor es sencillo pero no se como hacerlo.

[angeldmm]

Tengo el tftpd32
NO se como configurarlo.
En tftp server no se si tengo que poner algo o como se pone
En Tftp Client Host...? Port.......?
File es la ruta del firm?
get o put
En DHCP Server NI idea
En Syslog Server ?????????????

[angeldmm]

la configuracion en conexiones de red que esa es:
DIRECCION IP: 192.168.100.10
MASCARA: 255.255.255.0
GATEWAY: 192.168.100.1
Y otra cosa es cuando le pulsamos la P para entrar en el menu.ahi es cuando
tienes que poner 192.168.100.1 en la ip y en la puesta de enlace luego cuando
pulses la opcion G es cuando as de poner 192.168.100.10 y lanzar el servidor
tftp y poner el nombre del firm con la extension

NO se como lanzar el servidor tftp.
Gracias por todo.

[serpor]

Te de jo el tftp que ami me gusta,ademas con este te sera sencillo lanzarlo
Para montar un tftp haces una carpeta nueva y adentro pones el tftp y el archivo a subir,cuando habras el tftp le buscas la ruta del archivo y le das a start y listo
Te lo dejo AQUI (Solo usuarios registrados pueden ver los links)
Cualquier duda avisa

[angeldmm]

Este si tiene pinta de ser sencillo.
Probare a ver que tal va.
Sois los mejoreeeeeeeeessssssssssssssss
Muchisimas gracias

[serpor]

A habido un compañero que le pasa lo mismo que a ti,voy a ver si me hago con uno y miro que pasa o si por narices hay que hacerlo con el temporal

[angeldmm]

Con el temporal funcionando.
Todo OK y gracias a vosotros.
Tengo de la zona de descargas una full flash con fersca.
Si esta flash se la metiera en vez del ram en flash funcionaria?
Si no es seguro se queda como esta.
Otra vez muchisimas gracias.

[serpor]

Ahora no puedo ver esa full flash,cuando este habilitada te lo digo
Prueba subiendo un temporal y sin reiniciar el modem mira si te deja activar telnet y asi podrias cambiar la mac atraves de telnet

[zambra]

hola angeldmm tienes un m.p