Descargas: arris dg860CWF

Dragon Tutorial plus advance login
Default Dragon 1.2 - Firmware dg860 - Unrestricted CLI - GUI - SFTP
I bring you Dragon 1.0, firmware for dg860 with CLI without restrictions and GUI

login ssh and WinSCP
1-Enter to http://192.168.100.1/hack.htm and put this serial E49BSMECA592284
2-Using UPoTD (85C9D207EBE8) enter to http://192.168.100.1/cgi-bin/adv_pwd_cgi and
then http://192.168.100.1/cgi-bin/tech_support_cgi activate shh and restart

User: root
Password: dragon

Unique Password of the Day (UPoTD)
85C9D207EBE8 (for Serial Number in E49BSMECA592284)

CHANGE OF MAC AND SERIAL NUMBER

Go to http://192.168.100.1/hack.htm

CHANGE OF CERTIFICATES

Rename the arris modem certificate as cm_cert.cer and its private key as cm_key_prv.bin
With WinSCP.net or some stfp client, transfer them to / nvram / 1 / security /

FORCE ARCHIVE OF CONFIGURATION

With WinSCP transfer the config file to / nvram / and rename it config.cm

ACCESS TO THE TELNET WITH CLI WITHOUT RESTRICTIONS

Telnet login
1-Enter to http://192.168.100.1/hack.htm and put this serial E49BSMECA592284
2-Using UPoTD (85C9D207EBE8) enter to http://192.168.100.1/cgi-bin/adv_pwd_cgi and
then http://192.168.100.1/cgi-bin/tech_support_cgi activate Telnet and restart

User: root
Password: dragon

/////////////////////////////////////////////

4-To stop the scan, copy & paste
Code:
co
docsis
scan 0
quit
hit enter until "Console>" appears
SOME FUNCTIONS OF THE CLI

ACTIVATE FACTORY MODE

Code:
nvm
! factory 1
stmfg
dmp (shows the factory parameters in the nvram)
If you need to change another parameter I could do it with one of these commands

DEACTIVATE BPI

Code
co
docsis
configDocsisModule 2 0
listDocsisModules (shows the Docsis modules)
IGNORE THE REG_RSP

Code:
co
docsis
Debug
SetDebugOption 18 1
showDebugOptions (shows the options of Debug)
CHANGE THE BOOTING SECTOR

Code:
co
docsis
Production
dir (list of firms)
setdef 2 (boot from sector 2)
You can exit the CLI with "exit" or "! Logout"

Use the CLI menu options at your own risk.
Any illegal activity carried out with this software is not the responsibility of its author.
Health
Dragonlord7791

===================================

Se prohíbe la copia y distribución no autorizadas de este firmware.

DragonLord NO PUEDE ser responsable de ningún acto malicioso realizado con este firmware

Este firmware es una descarga gratuita de los foros de Forocable y se puede distribuir gratuitamente en un estado no modificado y solo cuando se otorga crédito a DragonLord

Se le prohíbe cobrar por este firmware, esto incluye venderlo incluido con módems para obtener ganancias a menos que tenga una licencia de revendedor para hacerlo.

Este firmware es un complemento de las obras de Motorola / Arris, que conservan los derechos de autor del código original.

Al utilizar este firmware, reconoce que ha leído y acepta estar sujeto a los términos de uso mencionados anteriormente. Si no acepta los términos de uso, DEBE eliminar este firmware de su módem inmediatamente


Hilo Creado