Bitware 1.0.5.9 para el SB6190

Thanks Thanks:  5
Likes Likes:  5
Dislikes Dislikes:  0
Página 1 de 2 12 ÚltimoÚltimo
Resultados 1 al 15 de 29
  1. #1
    Avatar de Montes1818
    Cablero Amatista
    Fecha de Ingreso
    11-04-2020
    Mensajes
    61
    Gracias (Dados)
    0
    Gracias (Recibidos)
    5
    Me Gusta (Dados)
    0
    Me Gusta (Recibidos)
    5
    Me Disgusta (Dados)
    0
    Me Disgusta (Recibidos)
    0
    Descargas
    22
    Uploads
    0
    Mencionado
    0 Post(s)
    Poder de reputación
    0

    Predeterminado Bitware 1.0.5.9 para el SB6190

    Amigos aqui les traigo el Bitware 1.0.5.9, este firmware no es mio y solo es para usos de apredisaje. Si alguien logra poner los SB6190 online sin config file en Los Angeles me dan un pm porfavor. Ojo que si usan el otro que esta en otro post es(vgwsdk) no lo usen para el SB6190 o lo pueden brikear.


    [/URL]
    Última edición por Montes1818; 15/09/2020 a las 03:00

  2. Gracias Jopa87, nickson, kusagami, MSTRBIT, dnhacker agradecido(s) por este post
    Me Gusta nickson, MSTRBIT, kusagami le(s) gustó este post
  3. #2
    Avatar de ncb
    Cablero Habitual
    Fecha de Ingreso
    04-10-2011
    Mensajes
    42
    Gracias (Dados)
    4
    Gracias (Recibidos)
    0
    Me Gusta (Dados)
    0
    Me Gusta (Recibidos)
    0
    Me Disgusta (Dados)
    0
    Me Disgusta (Recibidos)
    0
    Descargas
    70
    Uploads
    0
    Mencionado
    0 Post(s)
    Poder de reputación
    0

    Predeterminado

    If you flashed a wrong file and if you did backup your modem, you still can to reflash your backup to unbrick it.

  4. #3
    Avatar de Montes1818
    Cablero Amatista
    Fecha de Ingreso
    11-04-2020
    Mensajes
    61
    Gracias (Dados)
    0
    Gracias (Recibidos)
    5
    Me Gusta (Dados)
    0
    Me Gusta (Recibidos)
    5
    Me Disgusta (Dados)
    0
    Me Disgusta (Recibidos)
    0
    Descargas
    22
    Uploads
    0
    Mencionado
    0 Post(s)
    Poder de reputación
    0

    Predeterminado

    If i didn't back it up and don't have access to the inside of the modem because i don't know how to solder, would it still be recoverable somehow?

  5. #4
    Avatar de azulmich
    Cablero se va iniciando
    Fecha de Ingreso
    22-04-2020
    Mensajes
    8
    Gracias (Dados)
    0
    Gracias (Recibidos)
    0
    Me Gusta (Dados)
    0
    Me Gusta (Recibidos)
    1
    Me Disgusta (Dados)
    0
    Me Disgusta (Recibidos)
    0
    Descargas
    1
    Uploads
    0
    Mencionado
    0 Post(s)
    Poder de reputación
    0

    Predeterminado


  6. #5
    Avatar de fantasma3
    Cablero Habitual
    Fecha de Ingreso
    28-05-2012
    Ubicación
    USA
    Mensajes
    32
    Gracias (Dados)
    2
    Gracias (Recibidos)
    3
    Me Gusta (Dados)
    1
    Me Gusta (Recibidos)
    3
    Me Disgusta (Dados)
    0
    Me Disgusta (Recibidos)
    0
    Descargas
    73
    Uploads
    0
    Mencionado
    0 Post(s)
    Poder de reputación
    0

    Predeterminado

    si es coorrecto el otro post no trabaja con el sb6190..

  7. #6
    Avatar de skyline629
    Cablero Amatista
    Fecha de Ingreso
    30-04-2020
    Mensajes
    81
    Gracias (Dados)
    0
    Gracias (Recibidos)
    2
    Me Gusta (Dados)
    0
    Me Gusta (Recibidos)
    1
    Me Disgusta (Dados)
    0
    Me Disgusta (Recibidos)
    0
    Descargas
    29
    Uploads
    0
    Mencionado
    0 Post(s)
    Poder de reputación
    0

    Predeterminado

    thanks

    - - - Updated - - -

    "Montes1818

    I can help you, but I'm not able to download BW from your link to test first.

  8. #7
    Avatar de Montes1818
    Cablero Amatista
    Fecha de Ingreso
    11-04-2020
    Mensajes
    61
    Gracias (Dados)
    0
    Gracias (Recibidos)
    5
    Me Gusta (Dados)
    0
    Me Gusta (Recibidos)
    5
    Me Disgusta (Dados)
    0
    Me Disgusta (Recibidos)
    0
    Descargas
    22
    Uploads
    0
    Mencionado
    0 Post(s)
    Poder de reputación
    0

    Predeterminado

    Can you help me? I have uploaded a new link to the post.

  9. Me Gusta nickson le(s) gustó este post
  10. #8
    Avatar de skyline629
    Cablero Amatista
    Fecha de Ingreso
    30-04-2020
    Mensajes
    81
    Gracias (Dados)
    0
    Gracias (Recibidos)
    2
    Me Gusta (Dados)
    0
    Me Gusta (Recibidos)
    1
    Me Disgusta (Dados)
    0
    Me Disgusta (Recibidos)
    0
    Descargas
    29
    Uploads
    0
    Mencionado
    0 Post(s)
    Poder de reputación
    0

    Predeterminado

    Thanks for the file. Let me start testing and will let you know when I get it online.

  11. #9
    Avatar de hyperangel
    Cablero Habitual
    Fecha de Ingreso
    28-02-2012
    Mensajes
    38
    Gracias (Dados)
    0
    Gracias (Recibidos)
    0
    Me Gusta (Dados)
    0
    Me Gusta (Recibidos)
    2
    Me Disgusta (Dados)
    0
    Me Disgusta (Recibidos)
    0
    Descargas
    81
    Uploads
    0
    Mencionado
    0 Post(s)
    Poder de reputación
    0

    Predeterminado

    Thanks

  12. #10
    Avatar de skyline629
    Cablero Amatista
    Fecha de Ingreso
    30-04-2020
    Mensajes
    81
    Gracias (Dados)
    0
    Gracias (Recibidos)
    2
    Me Gusta (Dados)
    0
    Me Gusta (Recibidos)
    1
    Me Disgusta (Dados)
    0
    Me Disgusta (Recibidos)
    0
    Descargas
    29
    Uploads
    0
    Mencionado
    0 Post(s)
    Poder de reputación
    0

    Predeterminado

    The only way to communicate with the modem is through Phison. If you don't have backup for your modem. Don't worry I have plenty. Is your modem pre-mode or original? If it's original, you have to learn how to solder the connections to get full access and load custom firmwares. I loaded BW and got access to GUI. After loading certs. I was not able to get online. The log stated the my cm private key is not loaded. so there is something wrong with the cert format that BW doesn't recognize. I need to find out what format does BW has to upload certs.

  13. #11
    Avatar de Montes1818
    Cablero Amatista
    Fecha de Ingreso
    11-04-2020
    Mensajes
    61
    Gracias (Dados)
    0
    Gracias (Recibidos)
    5
    Me Gusta (Dados)
    0
    Me Gusta (Recibidos)
    5
    Me Disgusta (Dados)
    0
    Me Disgusta (Recibidos)
    0
    Descargas
    22
    Uploads
    0
    Mencionado
    0 Post(s)
    Poder de reputación
    0

    Predeterminado

    Thanks, are you using the following cert names? cm_cert, mfg_cert, fw_key_prv.bin, mfg_key_pub.bin, root_pub_key.bin? They go in /nvram/1/security/. My modem was bought premoded but I haven't looked inside tbh.
    Última edición por Montes1818; 16/09/2020 a las 01:42

  14. #12
    Avatar de skyline629
    Cablero Amatista
    Fecha de Ingreso
    30-04-2020
    Mensajes
    81
    Gracias (Dados)
    0
    Gracias (Recibidos)
    2
    Me Gusta (Dados)
    0
    Me Gusta (Recibidos)
    1
    Me Disgusta (Dados)
    0
    Me Disgusta (Recibidos)
    0
    Descargas
    29
    Uploads
    0
    Mencionado
    0 Post(s)
    Poder de reputación
    0

    Predeterminado

    I finally got it to work. I will dump it and send it your way. when I get a chance.


    Oh, I forgot you don't have experience to do flash phison. What I could do is help you step by step, since it's a premod. Do you have the credentials to access GUI? Let me know so I can start helping you.

    Thanks
    Última edición por skyline629; 16/09/2020 a las 10:43

  15. #13
    Avatar de skyline629
    Cablero Amatista
    Fecha de Ingreso
    30-04-2020
    Mensajes
    81
    Gracias (Dados)
    0
    Gracias (Recibidos)
    2
    Me Gusta (Dados)
    0
    Me Gusta (Recibidos)
    1
    Me Disgusta (Dados)
    0
    Me Disgusta (Recibidos)
    0
    Descargas
    29
    Uploads
    0
    Mencionado
    0 Post(s)
    Poder de reputación
    0

    Predeterminado

    Here is the log.

    TI Logger: Init complete
    [INFO] [COMMON_COMPONENTS.GIM(pid=125)]: GIM initializing...
    [INFO] [COMMON_COMPONENTS.GIM(pid=125)]: GIM initialization complete. GIM_MODULE=3086
    [INFO] [COMMON_COMPONENTS.L2SWITCH(pid=124)]: Initializing L2switch library...
    [INFO] [COMMON_COMPONENTS.L2SWITCH(pid=124)]: Initializing L2switch...
    [INFO] [COMMON_COMPONENTS.L2SWITCH(pid=124)]: L2switch initialized successfully
    [INFO] [DOCSIS.INIT(pid=135)]: Exec NvramDb_Init
    [INFO] [DOCSIS.NVRAM_DB(pid=135)]: Restoring NVRAM DB from NVRAM ... SUCCESS
    [INFO] [DOCSIS.INIT(pid=135)]: Exec Bpi_DbInit
    [INFO] [DOCSIS.BPI(pid=135)]: readCertsFromNvram: #### CM Private Key already in the clear - legacy CA
    [INFO] [DOCSIS.INIT(pid=135)]: Exec Bpi_BpiAuthDb_DbInit
    [INFO] [DOCSIS.INIT(pid=135)]: Exec Bpi_BpiTekDb_DbInit
    [INFO] [DOCSIS.INIT(pid=135)]: Exec Bpi_SaMapDb_DbInit
    [INFO] [DOCSIS.INIT(pid=135)]: Exec SWDL_SwDlDb_Init
    [INFO] [DOCSIS.INIT(pid=135)]: Exec HalDb_Init
    [INFO] [DOCSIS.INIT(pid=135)]: Exec UpstreamParamsDb_Init
    [INFO] [DOCSIS.INIT(pid=135)]: Exec qos_IntDb_Init
    [WARNING] [DOCSIS.QOS(pid=135)]: Failed reset DSX TA SM to IDLE on TA DB Reset
    [INFO] [DOCSIS.INIT(pid=135)]: Exec CoSDb_Init
    [INFO] [DOCSIS.INIT(pid=135)]: Exec PrimaryDsFreqOverrideDb_Init
    [INFO] [DOCSIS.INIT(pid=135)]: Exec L2vpnDb_Init
    [INFO] [DOCSIS.DOCSISCFG_DB(pid=135)]: IpProvisMode=0
    [INFO] [DOCSIS.INIT(pid=135)]: Looking for LSDDB /nvram/1/lsddb.ini
    [ERROR] [COMMON_COMPONENTS.LSDDB(pid=234)]: LSDDB - actualDb == NULL
    [INFO] [ARRIS.INIT(pid=246)]: ************** ARRIS Init ***************
    [INFO] [ARRIS.DB(pid=246)]: Database Manager Initialization complete
    [INFO] [ARRIS.INIT(pid=246)]: **************** App Mode ***************
    [INFO] [ARRIS.INIT(pid=246)]: ************ Initializing Ethernet *************
    [INFO] [ARRIS.DB(pid=246)]: HomePlug shared memory initialization complete
    [INFO] [ARRIS.DB(pid=246)]: ARRIS MTA Surveillance Port Initialization complete
    [INFO] [ARRIS.DB(pid=246)]: ARRIS TR143 SPEEDTEST Database Manager Initialization complete
    [INFO] [ARRIS.DB(pid=246)]: ARRIS npm Database Manager Initialization complete
    [INIT] [ARRIS.RF_SCAN(pid=246)]: Initializing RF frequency scanner
    [INFO] [ARRIS.RF(pid=246)]: RF Initialization complete
    [INFO] [ARRIS.INIT(pid=246)]: ******** Initializing Webserver *********
    [ERROR] [ARRIS.INIT(pid=246)]: Error: CM Private Key is not installed
    [ERROR] [ARRIS.INIT(pid=246)]: Failed to disable ATOM UART
    [INFO] [ARRIS.INIT(pid=246)]: ********* ARRIS Init Complete **********
    [WARNING] [COMMON_COMPONENTS.L2SWITCH(pid=294)]: L2SWITCH_SetPortMode:2150 Port is already in requested mode, Port=RGMII0, mode=RGMII_1000
    [WARNING] [COMMON_COMPONENTS.L2SWITCH(pid=295)]: L2SWITCH_SetPortMode:2150 Port is already in requested mode, Port=RGMII0, mode=RGMII_1000
    [INFO] [ARRIS.NVM(pid=293)]: NVM Write
    [INFO] [ARRIS.NVM(pid=298)]: NVM Write
    [ERROR] [COMMON_COMPONENTS.WLAN_RPC(pid=280)]: LSD - Failed to register RPC to host 192.168.254.254
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Device #0 initialization (HAL_mxlHrclsDeviceGlobalInitSrv) Start
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ****** MxL Tuner device #0 initialization SUCCESS ********
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: **** MxL Tuner Configuration done successfully ****
    [INFO] [DOCSIS.HAL_PHY(pid=280)]: HSIF lane[0] released from reset - ok [Reg 0x1e44 = 0x5481]
    [INFO] [DOCSIS.HAL_PHY(pid=280)]: HSIF lane 0 Init done ok [disable_tx_loops=0 SerDes_lock_loops=0 power_up_SerDes_loops=0]
    [INFO] [DOCSIS.HAL_PHY(pid=280)]: HSIF lane[1] released from reset - ok [Reg 0x1e45 = 0x5481]
    [INFO] [DOCSIS.HAL_PHY(pid=280)]: HSIF lane 1 Init done ok [disable_tx_loops=0 SerDes_lock_loops=0 power_up_SerDes_loops=0]
    [INFO] [DOCSIS.HAL_PHY(pid=280)]: HSIF Init done ok [counters_loops=0 sync_lock_loops=0 ]
    [INFO] [DOCSIS.HAL(pid=280)]: Puma HSIF initialization done. DS lanes are locked
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: US DAC PSM NOT enabled on this board!
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Setting DAC state to 1
    [INFO] [DOCSIS.HAL_PHY(pid=280)]: No errors in HSIF lanes
    [INFO] [DOCSIS.HAL_PHY(pid=280)]: No errors in HSIF lanes
    [INFO] [DOCSIS.HAL(pid=280)]: Tuner HSIF initialization done. US is locked
    [INFO] [DOCSIS.HAL(pid=280)]: Tuner HSIF initialization done. US is locked
    [INFO] [DOCSIS.HAL(pid=280)]: PGA enable. AMP_OFF - Normal
    [ERROR] [COMMON_COMPONENTS.WLAN_RPC(pid=505)]: LSD - Failed to register RPC to host 192.168.254.254
    [INFO] [COMMON_COMPONENTS.EVENT_MNGR(pid=527)]: Control socket created successfully
    [INIT] [COMMON_COMPONENTS.EVENT_MNGR(pid=527)]: Init successfully
    [INFO] [COMMON_COMPONENTS.EVENT_MNGR(pid=527)]: Opening SNMP service
    [INFO] [COMMON_COMPONENTS.EVENT_MNGR(pid=527)]: Starting main loop
    [INFO] [DOCSIS.DBRIDGE(pid=528)]: Connect DOCSIS local bridge : Connect, lsdActive 0
    [INFO] [DOCSIS.DBRIDGE(pid=528)]: Linked system NPGroups (/nvram/1/npgroups.ini) to default LSDB (/etc/npgroups.ini)
    [INFO] [DOCSIS.DBRIDGE(pid=528)]: Create LSDs: /nvram/1/lsddb.ini assign VLAN per port
    [INFO] [COMMON_COMPONENTS.LSD(pid=528)]: LSD - Create LSD devices: /nvram/1/lsddb.ini
    [WARNING] [COMMON_COMPONENTS.L2SWITCH(pid=528)]: L2SWITCH_SetPortTaggingMode:2275 Port already has desired tagging mode, Port=RGMII0, Tagged=0
    [INFO] [DOCSIS.DBRIDGE(pid=528)]: Connect NP for all groups (cannot parse NPGroups file)
    [WARNING] [COMMON_COMPONENTS.L2SWITCH(pid=528)]: L2SWITCH_SetPortTaggingMode:2275 Port already has desired tagging mode, Port=DOCSIS, Tagged=1
    [INFO] [DOCSIS.DMG(pid=528)]: DMG_guard_Enable:: DMG_EnableCtr == -1
    [INFO] [DOCSIS.CHM(pid=280)]: Init 32 DOCSIS DS channels
    [INFO] [DOCSIS.CHM(pid=280)]: Init 4 US channels
    [INFO] [DOCSIS.FREQ_SCAN(pid=280)]:
    [INFO] [DOCSIS.FREQ_SCAN(pid=280)]: *** CM SYNCHRONIZING... ***
    [INFO] [DOCSIS.FREQ_SCAN(pid=280)]:
    [INFO] [ARRIS.RF_SCAN(pid=280)]: ----> NB Scanning 747000000 Hz
    [INFO] [DOCSIS.HAL(pid=483)]: 1 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=483)]: 1 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=483)]: 1 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=483)]: DS recevier 1 lock successfully on DS frequency 747000000.
    [INFO] [DOCSIS.DS(pid=483)]: DS[1]: Locked on primary DS 747000000Hz.
    [WARNING] [DOCSIS.DS(pid=483)]: Got SYNC-SA [00:01:5c:a5:56:61] but the MDD filter is disabled!
    [WARNING] [DOCSIS.MDD(pid=269)]: Invalid event type code - ignored.
    [WARNING] [DOCSIS.MDD(pid=269)]: Invalid event type code - ignored.
    [WARNING] [DOCSIS.MDD(pid=269)]: Invalid event type code - ignored.
    [WARNING] [DOCSIS.MDD(pid=269)]: Invalid event type code - ignored.
    [WARNING] [DOCSIS.MDD(pid=269)]: Invalid event type code - ignored.
    [WARNING] [DOCSIS.MDD(pid=269)]: Invalid event type code - ignored.
    [WARNING] [DOCSIS.MDD(pid=269)]: Invalid event type code - ignored.
    [WARNING] [DOCSIS.MDD(pid=269)]: Invalid event type code - ignored.
    [WARNING] [DOCSIS.MDD(pid=269)]: Invalid event type code - ignored.
    [WARNING] [DOCSIS.MDD(pid=269)]: Invalid event type code - ignored.
    [INFO] [DOCSIS.FREQ_SCAN(pid=280)]: MDD Received on primary DS 747000000Hz.
    [INFO] [DOCSIS.UCD(pid=269)]: US[1] [UCID All]: UCD Collect on DS[1]...
    [INFO] [DOCSIS.UCD(pid=269)]: US[1] [UCID All]: 4 UCDs Found; 4 UCDs ordered [UCIDs: 1 4 2 3 0 0 0 0].
    [INFO] [DOCSIS.UCD(pid=269)]: US[1] [UCID 1]: UCD Collect on DS[1]...
    [INFO] [DOCSIS.UCD(pid=269)]: US[1] [UCID 1]: UCD Found on DS[1] [change count 1].
    [INFO] [DOCSIS.US(pid=280)]: US[1] [UCID 1]: Start B-INIT-Ranging [sid 0] [tech 0]...
    [INFO] [DOCSIS.US(pid=501)]: startData.txAttr.powerOffset = 0xc6 (49), startData.txAttr.freqOffset = 0x0
    [INFO] [DOCSIS.US(pid=501)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0
    [INFO] [DOCSIS.US(pid=501)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0
    [INFO] [DOCSIS.US(pid=501)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0
    [INFO] [DOCSIS.US(pid=501)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0
    [INFO] [DOCSIS.US(pid=501)]: US[1] [UCID 1]: RNG-RSP CONTINUE.
    [INFO] [DOCSIS.US(pid=501)]: rngRspData: usId1: d-Gain: 4.25 (New:49.00 dBmV), Time: 2016.000000, Freq: 0 (CONTINUE)
    [INFO] [DOCSIS.US(pid=501)]: rngRspData: usId1: d-Gain: 0.00 (New:49.00 dBmV), Time: 0.000000, Freq: 0 (CONTINUE)
    [INFO] [DOCSIS.US(pid=501)]: US[1] [UCID 1]: RNG-RSP SUCCESS.
    [INFO] [DOCSIS.PROVISIONING(pid=624)]:
    [INFO] [DOCSIS.PROVISIONING(pid=624)]: *** CM PROVISIONING... ***
    [INFO] [DOCSIS.PROVISIONING(pid=624)]:
    [INFO] [DOCSIS.PROVISIONING(pid=624)]: EAE Disabled.
    [INFO] [DOCSIS.IPP(pid=624)]: -------------------------------------------------------
    [INFO] [DOCSIS.IPP(pid=624)]: IP provisioning start in the IP_PROV_DPM mode
    [INFO] [DOCSIS.IPP(pid=624)]: -------------------------------------------------------
    [INFO] [DOCSIS.IPP(pid=624)]: [addLLocal()] - Link-Local Addr =
    [INFO] [DOCSIS.UTILS(pid=624)]: mac address =
    [INFO] [DOCSIS.IPP(pid=624)]: [addLLocal()] - ALL NODES =
    [INFO] [DOCSIS.UTILS(pid=624)]: mac address =
    [INFO] [DOCSIS.IPP(pid=624)]: [addLLocal()] - Link-Local =
    [ERROR] [DOCSIS.HAL(pid=654)]: HAL DB Un-Initialized.
    [ERROR] [DOCSIS.REGISTRATION(pid=654)]: HalDb_GetMaxReseqDSID Failed.
    [ERROR] [DOCSIS.HAL(pid=654)]: HAL DB Un-Initialized.
    [ERROR] [DOCSIS.REGISTRATION(pid=654)]: HalDb_GetMaxReseqDSID Failed.
    [ERROR] [DOCSIS.IPP(pid=654)]: [DHCP6_PLG]: reportConfigError(from report_config): receive error TI_DHCP6C_XID_MISMATCH in the state DHCP6C_IDLE
    [ERROR] [DOCSIS.IPP(pid=654)]: [IPP]: report_config In the DHCPv6 plugin happen error
    [INFO] [DOCSIS.IPP(pid=654)]: [DHCP6_PLG]: dhcp6_addAddr():Set address to the system
    [WARNING] [DOCSIS.IPP(pid=655)]: [DHCP4_PLG]: The DHCPv4 client did not receive the SYSLOG server address.
    [INFO] [DOCSIS.IPP(pid=655)]: [DHCP4_PLG]: Set to the wan0 addr: mask: router:
    [INFO] [DOCSIS.UTILS(pid=655)]:
    [INFO] [DOCSIS.UTILS(pid=655)]:
    [INFO] [DOCSIS.UTILS(pid=655)]:
    [INFO] [DOCSIS.UTILS(pid=655)]:
    [INFO] [DOCSIS.UTILS(pid=655)]:
    [INFO] [DOCSIS.UTILS(pid=654)]:
    [INFO] [DOCSIS.UTILS(pid=654)]:
    [INFO] [DOCSIS.UTILS(pid=654)]:
    [INFO] [DOCSIS.UTILS(pid=654)]:
    [INFO] [DOCSIS.UTILS(pid=654)]:
    [INFO] [DOCSIS.UTILS(pid=654)]:
    [INFO] [DOCSIS.UTILS(pid=624)]:
    [INFO] [DOCSIS.UTILS(pid=624)]:
    [INFO] [COMMON_COMPONENTS.WLAN_RPC(pid=624)]: Power on APP CPU
    [ERROR] [COMMON_COMPONENTS.SWT(pid=528)]: SWT - Got request SWT_GIM_EVENT - SWT_EVCMD_EnablePort: Enable app0 port(s) in L2switch - CONDITIONAL
    [INFO] [COMMON_COMPONENTS.WLAN_RPC(pid=624)]: rpc_initSpeedtestRequest : retry 0 times to Power On ATOM
    [WARNING] [COMMON_COMPONENTS.L2SWITCH(pid=624)]: L2SWITCH_SetPortTaggingMode:2275 Port already has desired tagging mode, Port=DOCSIS, Tagged=1
    [WARNING] [COMMON_COMPONENTS.L2SWITCH(pid=624)]: L2SWITCH_SetPortTaggingMode:2275 Port already has desired tagging mode, Port=ATOM, Tagged=1
    [INFO] [COMMON_COMPONENTS.WLAN_RPC(pid=624)]: Power on APP CPU
    [ERROR] [COMMON_COMPONENTS.SWT(pid=528)]: SWT - Got request SWT_GIM_EVENT - SWT_EVCMD_EnablePort: Enable app0 port(s) in L2switch - CONDITIONAL
    [INFO] [COMMON_COMPONENTS.WLAN_RPC(pid=682)]: Power on APP CPU
    [ERROR] [COMMON_COMPONENTS.SWT(pid=528)]: SWT - Got request SWT_GIM_EVENT - SWT_EVCMD_EnablePort: Enable app0 port(s) in L2switch - CONDITIONAL
    [INFO] [COMMON_COMPONENTS.WLAN_RPC(pid=682)]: rpc_syncSysTimeRequest : retry 0 times to Power On ATOM
    [INFO] [DOCSIS.IPP(pid=682)]: =========================================
    [INFO] [DOCSIS.IPP(pid=682)]: [TOD_PLG]: Was revceived time Wed Sep 16 01:12:24 2020
    from ToD server, timezone =-28800
    [INFO] [DOCSIS.IPP(pid=682)]: =========================================
    [INFO] [DOCSIS.IPP(pid=624)]: Try 1 to download configuration file
    [INFO] [DOCSIS.IPP(pid=624)]: Configuration file
    [ENTER] [DOCSIS.CFG_PARSER(pid=624)]: cfgfParserInit
    [ENTER] [DOCSIS.CFG_PARSER(pid=624)]: [performFirstPass(in)]
    [EXIT] [DOCSIS.CFG_PARSER(pid=624)]: [performFirstPass(out)]
    [ENTER] [DOCSIS.CFG_PARSER(pid=624)]: [verifyConfigFile(in)]
    [EXIT] [DOCSIS.CFG_PARSER(pid=624)]: [verifyConfigFile(out)]
    [ENTER] [DOCSIS.CFG_PARSER(pid=624)]: [resetDBs(in)]
    [EXIT] [DOCSIS.CFG_PARSER(pid=624)]: [resetDBs(out)]
    [INFO] [DOCSIS.REGISTRATION(pid=269)]: REG-RSP-MP [3 fragments] received [CMTS Response 0].
    [INFO] [DOCSIS.REGISTRATION(pid=269)]: Got MDF Support Mode 2 in REG-RSP
    [INFO] [DOCSIS.US(pid=501)]: US[1] [UCID 1]: RNG-RSP CONTINUE.
    [INFO] [DOCSIS.US(pid=501)]: rngRspData: usId1: d-Gain: 0.00 (New:49.00 dBmV), Time: 0.000000, Freq: 0 (CONTINUE)
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 31
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 30
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 29
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 28
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 27
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 26
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 25
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 24
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 23
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 22
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 21
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 20
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 19
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 18
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 17
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 16
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 15
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 14
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 13
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 12
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 11
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 10
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 9
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 8
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 7
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 6
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 5
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 4
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 3
    [INFO] [DOCSIS.DS(pid=280)]: Pause portID = 2
    [INFO] [DOCSIS.HAL(pid=461)]: 23 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=461)]: 23 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=461)]: 23 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=461)]: DS recevier 23 lock successfully on DS frequency 693000000.
    [INFO] [DOCSIS.DS(pid=461)]: DS[23]: Locked on secondary DS 693000000Hz.
    [INFO] [DOCSIS.HAL(pid=464)]: 20 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=464)]: 20 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=464)]: 20 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=464)]: DS recevier 20 lock successfully on DS frequency 675000000.
    [INFO] [DOCSIS.DS(pid=464)]: DS[20]: Locked on secondary DS 675000000Hz.
    [INFO] [DOCSIS.HAL(pid=462)]: 22 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=462)]: 22 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=462)]: 22 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=462)]: DS recevier 22 lock successfully on DS frequency 687000000.
    [INFO] [DOCSIS.DS(pid=462)]: DS[22]: Locked on secondary DS 687000000Hz.
    [INFO] [DOCSIS.HAL(pid=463)]: 21 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=463)]: 21 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=463)]: 21 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=463)]: DS recevier 21 lock successfully on DS frequency 681000000.
    [INFO] [DOCSIS.DS(pid=463)]: DS[21]: Locked on secondary DS 681000000Hz.
    [INFO] [DOCSIS.HAL(pid=460)]: 24 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=460)]: 24 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=460)]: 24 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=460)]: DS recevier 24 lock successfully on DS frequency 699000000.
    [INFO] [DOCSIS.DS(pid=460)]: DS[24]: Locked on secondary DS 699000000Hz.
    [INFO] [DOCSIS.HAL(pid=466)]: 18 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=466)]: 18 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=466)]: 18 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=466)]: DS recevier 18 lock successfully on DS frequency 663000000.
    [INFO] [DOCSIS.DS(pid=466)]: DS[18]: Locked on secondary DS 663000000Hz.
    [INFO] [DOCSIS.HAL(pid=467)]: 17 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=467)]: 17 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=467)]: 17 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=467)]: DS recevier 17 lock successfully on DS frequency 657000000.
    [INFO] [DOCSIS.DS(pid=467)]: DS[17]: Locked on secondary DS 657000000Hz.
    [INFO] [DOCSIS.HAL(pid=468)]: 16 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=468)]: 16 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=468)]: 16 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=468)]: DS recevier 16 lock successfully on DS frequency 651000000.
    [INFO] [DOCSIS.HAL(pid=470)]: 14 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=470)]: 14 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=470)]: 14 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=470)]: DS recevier 14 lock successfully on DS frequency 639000000.
    [INFO] [DOCSIS.DS(pid=470)]: DS[14]: Locked on secondary DS 639000000Hz.
    [INFO] [DOCSIS.DS(pid=468)]: DS[16]: Locked on secondary DS 651000000Hz.
    [INFO] [DOCSIS.HAL(pid=471)]: 13 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=471)]: 13 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=471)]: 13 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=471)]: DS recevier 13 lock successfully on DS frequency 633000000.
    [INFO] [DOCSIS.DS(pid=471)]: DS[13]: Locked on secondary DS 633000000Hz.
    [INFO] [DOCSIS.HAL(pid=473)]: 11 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=473)]: 11 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=473)]: 11 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=473)]: DS recevier 11 lock successfully on DS frequency 621000000.
    [INFO] [DOCSIS.DS(pid=473)]: DS[11]: Locked on secondary DS 621000000Hz.
    [INFO] [DOCSIS.HAL(pid=474)]: 10 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=474)]: 10 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=474)]: 10 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=474)]: DS recevier 10 lock successfully on DS frequency 615000000.
    [INFO] [DOCSIS.DS(pid=474)]: DS[10]: Locked on secondary DS 615000000Hz.
    [INFO] [DOCSIS.HAL(pid=475)]: 9 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=475)]: 9 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=475)]: 9 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=475)]: DS recevier 9 lock successfully on DS frequency 609000000.
    [INFO] [DOCSIS.DS(pid=475)]: DS[9]: Locked on secondary DS 609000000Hz.
    [INFO] [DOCSIS.US(pid=501)]: US[1] [UCID 1]: RNG-RSP SUCCESS.
    [INFO] [DOCSIS.HAL(pid=478)]: 6 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=478)]: 6 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=478)]: 6 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=478)]: DS recevier 6 lock successfully on DS frequency 591000000.
    [INFO] [DOCSIS.DS(pid=478)]: DS[6]: Locked on secondary DS 591000000Hz.
    [INFO] [DOCSIS.HAL(pid=479)]: 5 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=479)]: 5 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=479)]: 5 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=479)]: DS recevier 5 lock successfully on DS frequency 585000000.
    [INFO] [DOCSIS.DS(pid=479)]: DS[5]: Locked on secondary DS 585000000Hz.
    [INFO] [DOCSIS.HAL(pid=481)]: 3 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=481)]: 3 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=481)]: 3 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=481)]: DS recevier 3 lock successfully on DS frequency 573000000.
    [INFO] [DOCSIS.DS(pid=481)]: DS[3]: Locked on secondary DS 573000000Hz.
    [INFO] [DOCSIS.HAL(pid=480)]: 4 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=480)]: 4 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=480)]: 4 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=480)]: DS recevier 4 lock successfully on DS frequency 579000000.
    [INFO] [DOCSIS.DS(pid=480)]: DS[4]: Locked on secondary DS 579000000Hz.
    [INFO] [DOCSIS.HAL(pid=465)]: 19 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=465)]: 19 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=465)]: 19 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=465)]: DS recevier 19 lock successfully on DS frequency 669000000.
    [INFO] [DOCSIS.DS(pid=465)]: DS[19]: Locked on secondary DS 669000000Hz.
    [INFO] [DOCSIS.HAL(pid=469)]: 15 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=469)]: 15 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=469)]: 15 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=469)]: DS recevier 15 lock successfully on DS frequency 645000000.
    [INFO] [DOCSIS.DS(pid=469)]: DS[15]: Locked on secondary DS 645000000Hz.
    [INFO] [DOCSIS.HAL(pid=472)]: 12 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=472)]: 12 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=472)]: 12 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=472)]: DS recevier 12 lock successfully on DS frequency 627000000.
    [INFO] [DOCSIS.DS(pid=472)]: DS[12]: Locked on secondary DS 627000000Hz.
    [INFO] [DOCSIS.HAL(pid=477)]: 7 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=477)]: 7 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=477)]: 7 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=477)]: DS recevier 7 lock successfully on DS frequency 597000000.
    [INFO] [DOCSIS.DS(pid=477)]: DS[7]: Locked on secondary DS 597000000Hz.
    [INFO] [DOCSIS.HAL(pid=482)]: 2 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=482)]: 2 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=482)]: 2 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=482)]: DS recevier 2 lock successfully on DS frequency 567000000.
    [INFO] [DOCSIS.DS(pid=482)]: DS[2]: Locked on secondary DS 567000000Hz.
    [INFO] [DOCSIS.HAL(pid=476)]: 8 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=476)]: 8 Passed FEC Lock.
    [INFO] [DOCSIS.HAL(pid=476)]: 8 Passed Mpeg Lock.
    [INFO] [DOCSIS.HAL(pid=476)]: DS recevier 8 lock successfully on DS frequency 603000000.
    [INFO] [DOCSIS.DS(pid=476)]: DS[8]: Locked on secondary DS 603000000Hz.
    [INFO] [DOCSIS.HAL(pid=454)]: MPT 29 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=454)]: Lock Status (receiverId= 29): QAM= LOCKED, FEC= LOCKED, MPEG= LOCKED
    [INFO] [DOCSIS.HAL(pid=456)]: MPT 27 Passed Qam Lock.
    [INFO] [DOCSIS.HAL(pid=456)]: Lock Status (receiverId= 27): QAM= LOCKED, FEC= LOCKED, MPEG= LOCKED
    [INFO] [DOCSIS.HAL(pid=459)]: MPT 24 Passed Qam Lock.
    [WARNING] [DOCSIS.HAL(pid=207)]: ICC_wait_message of cmdCmpltICCContext failed
    [ERROR] [DOCSIS.HAL(pid=280)]: ******* HAL_UsFwDownload_DynamicDownload: HAL_SendFWShutdown FAILED *********
    [INFO] [DOCSIS.US(pid=280)]: US[4] [UCID 2]: Start Ranging [sid 9197] [tech 2]...
    [INFO] [DOCSIS.US(pid=504)]: startData.txAttr.powerOffset = 0xc4 (49), startData.txAttr.freqOffset = 0x0
    [INFO] [DOCSIS.US(pid=503)]: startData.txAttr.powerOffset = 0xc4 (49), startData.txAttr.freqOffset = 0x0
    [INFO] [DOCSIS.US(pid=280)]: US[3] [UCID 3]: Start Ranging [sid 9197] [tech 2]...
    [INFO] [DOCSIS.US(pid=502)]: startData.txAttr.powerOffset = 0xc4 (49), startData.txAttr.freqOffset = 0x0
    [INFO] [DOCSIS.US(pid=280)]: US[2] [UCID 4]: Start Ranging [sid 9197] [tech 2]...
    [INFO] [DOCSIS.US(pid=503)]: rngRspData: usId3: d-Gain: 0.50 (New:49.50 dBmV), Time: 0.000000, Freq: 0 (CONTINUE)
    [INFO] [DOCSIS.US(pid=502)]: rngRspData: usId4: d-Gain: 2.00 (New:51.00 dBmV), Time: 1.000000, Freq: 0 (CONTINUE)
    [INFO] [DOCSIS.US(pid=504)]: rngRspData: usId2: d-Gain: 0.25 (New:49.25 dBmV), Time: 0.000000, Freq: 0 (CONTINUE)
    [INFO] [DOCSIS.US(pid=503)]: US[3] [UCID 3]: RNG-RSP SUCCESS.
    [INFO] [DOCSIS.US(pid=502)]: US[2] [UCID 4]: RNG-RSP SUCCESS.
    [INFO] [DOCSIS.US(pid=504)]: US[4] [UCID 2]: RNG-RSP SUCCESS.
    [INFO] [DOCSIS.REGISTRATION(pid=624)]: TCC Acquisition complete.
    [INFO] [DOCSIS.REGISTRATION(pid=624)]: pt1.RegAck required
    [INFO] [DOCSIS.REGISTRATION(pid=624)]: REG-ACK Sent.
    [INFO] [DOCSIS.DMG(pid=528)]: BPI Enabled.
    [INFO] [DOCSIS.DMG(pid=528)]: Start BPI...
    [INFO] [DOCSIS.BPI(pid=507)]: Auth Sequence number=1
    [INFO] [DOCSIS.BPI(pid=507)]: Setting SAID 9197 to be primary
    [WARNING] [DOCSIS.SWDL(pid=528)]: EFL could not find a usable entry
    [INFO] [ARRIS.SYS(pid=528)]: DHCPD: disabling CM DHCPD server
    [INFO] [ARRIS.NVM(pid=528)]: NVM Write
    [INFO] [DOCSIS.DMG(pid=528)]:
    [INFO] [DOCSIS.DMG(pid=528)]: *** INITIALIZATION COMPLETE - MODEM IS OPERATIONAL ***
    [INFO] [DOCSIS.DMG(pid=528)]:
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwCorrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwErrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwReceived = 3838760
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CorrBits = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ReceivedMpeg = 3838760
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ErrMpeg = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Erasures = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwCorrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwErrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwReceived = 3831027
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CorrBits = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ReceivedMpeg = 3831027
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ErrMpeg = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Erasures = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwCorrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwErrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwReceived = 3838543
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CorrBits = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ReceivedMpeg = 3838543
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ErrMpeg = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Erasures = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwCorrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwErrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwReceived = 3843768
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CorrBits = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ReceivedMpeg = 3843768
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ErrMpeg = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Erasures = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwCorrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwErrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwReceived = 3830498
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CorrBits = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ReceivedMpeg = 3830498
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ErrMpeg = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Erasures = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwCorrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwErrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwReceived = 3848130
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CorrBits = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ReceivedMpeg = 3848130
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ErrMpeg = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Erasures = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwCorrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwErrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwReceived = 3832450
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CorrBits = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ReceivedMpeg = 3832450
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ErrMpeg = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Erasures = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwCorrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwErrCount = 5409
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwReceived = 5409
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CorrBits = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ReceivedMpeg = 5409
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ErrMpeg = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Erasures = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwCorrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwErrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwReceived = 48547
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CorrBits = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ReceivedMpeg = 48547
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ErrMpeg = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Erasures = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwCorrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwErrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwReceived = 52535
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CorrBits = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ReceivedMpeg = 52535
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ErrMpeg = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Erasures = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwCorrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwErrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwReceived = 54689
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CorrBits = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ReceivedMpeg = 54689
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ErrMpeg = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Erasures = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwCorrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwErrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwReceived = 57256
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CorrBits = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ReceivedMpeg = 57256
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ErrMpeg = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Erasures = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwCorrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwErrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwReceived = 59391
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CorrBits = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ReceivedMpeg = 59391
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ErrMpeg = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Erasures = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwCorrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwErrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwReceived = 61969
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CorrBits = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ReceivedMpeg = 61969
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ErrMpeg = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Erasures = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwCorrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwErrCount = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CwReceived = 64538
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: CorrBits = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ReceivedMpeg = 64538
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: ErrMpeg = 0
    [INFO] [DOCSIS.HAL_TUNER(pid=240)]: Erasures = 0

  16. #14
    Avatar de Montes1818
    Cablero Amatista
    Fecha de Ingreso
    11-04-2020
    Mensajes
    61
    Gracias (Dados)
    0
    Gracias (Recibidos)
    5
    Me Gusta (Dados)
    0
    Me Gusta (Recibidos)
    5
    Me Disgusta (Dados)
    0
    Me Disgusta (Recibidos)
    0
    Descargas
    22
    Uploads
    0
    Mencionado
    0 Post(s)
    Poder de reputación
    0

    Predeterminado

    Very nice, what speed are you getting? Did you forced a config or used the certs original speed?

  17. #15
    Avatar de skyline629
    Cablero Amatista
    Fecha de Ingreso
    30-04-2020
    Mensajes
    81
    Gracias (Dados)
    0
    Gracias (Recibidos)
    2
    Me Gusta (Dados)
    0
    Me Gusta (Recibidos)
    1
    Me Disgusta (Dados)
    0
    Me Disgusta (Recibidos)
    0
    Descargas
    29
    Uploads
    0
    Mencionado
    0 Post(s)
    Poder de reputación
    0

    Predeterminado

    Don't really want to get into details. It's bonding 32x4. I would say pretty fast.


Página 1 de 2 12 ÚltimoÚltimo

Etiquetas para este tema

Permisos de publicación

  • No puedes crear nuevos temas
  • No puedes responder temas
  • No puedes subir archivos adjuntos
  • No puedes editar tus mensajes
  •