-
alphaware4+REV8+alpha4_MOTO_PUMA5+
================================================== =========================================
nb Tengo que precisar que los firmware mío no tienen ningún patch/hack por byepass security de ninguna conpania de internet (ISP)
nb dragonlord7791 use kofi add me if you need,thankyu
Please read all the info before flashing the modem, all my reads regarding
lea toda la información antes de flashear el módem, todas mis lecturas relacionadas con la publicación
thnkyu /
Las donaciones para alphaware están abiertas. Vía paypal, [email protected]
Gracias por el apoyo a todos los miembros.
===
Donations for alphaware are open. Via paypal, [email protected]
Thank you for your support to all the members
==================================
FIRMWARE alphaware_REV8_PUMA5 BASED ON KOMODO 1.6.14
FIRMWARE alpha4.7.3_5 BASED ON KOMODO 1.0.7.3
FIRMWARE alphaware4_firm_5_7.3 BASED ON KOMODO 1.0.7.3
FIRMWARE alpha4_3 BASED ON KOMODO 1.0.7.0
FIRMWARE alphaware4_firmware_34 BASED ON KOMODO 1.0.7.0
4 /26/21--------------------PATCH OUT ---------------------PATCH OUT ----------------------4/26/21
================================================== ==============
PATCH2 OUT ! ALPHAWARE REV8
SSH password can be changed now ! Thankyu to all guys
================================================== ==================
nb wrote alphaware alwais over stock firmware /siempre escriba alphaware quando el modem sea original
flash UBFI2 OR UBFI1 whith alpha 7.0-7.3 / FLASH BOTH UBFI and UBFI2 WHIT alphaware_REV8_PUMA5
nb 7.0 and 7.3 just flash 1 UBFI 1 OR 2 AND TRY TO BOOT MODEM. Stock image usually boot from UBFI2
nb make shoore you clean cokies on 192.168.100.1 before /after flashing modem
dragon youtube channel
-------------------
NBB
Make sure you select the correct modem and after change mac address
Don't select 8 channel modem from 4 channel modem, you will brick for sure
Asegúrese de seleccionar el módem correcto y luego cambie mac del modem
No seleccionará módem de 8 canales en módem de 4 canales, seguramente se bloqueará / brick
====================
Universal login/ passwd alphaware
ssh credential /win scp
root
dragon or e95cacfe873926580cf37d79b233ba88
Change ssh password..
passwd
Changing password for root
New password:
===============
flash ubfi2 OR UBFI1 whith alpha 7.0-7.3 / FLASH BOTH UBFI WHIT alphaware_REV8_PUMA5
-------------------------------
FIRMWARE alpha4.7.3_5 BASED ON KOMODO 1.0.7.3
FIRMWARE alphaware4_firm_5_7.3 BASED ON KOMODO 1.0.7.3
FIRMWARE alpha4_3 BASED ON KOMODO 1.0.7.0
FIRMWARE alphaware4_firmware_34 BASED ON KOMODO 1.0.7.0
Upload certs(cm_cert.cer cm_key_prv.bin) win scP
cm_cert.cer in /nvram/1/security
cm_key_prv.bin in /nvram/1/security
change mac address
production
prodset (don t worry if error happan on save)
reboot modem
//////////////////////////////////////////
Firmware Alphaware4 rev 11.b45 --- Based Firmware Name: SB_KOMODO-1.0.7.0-SCM00-NOSH
===========================================
test it on sb6120/sb6121/sb6141/U10C035
IMPORTANT !
nb When you set things he's normal to have a black screen image or white screan
nb Cuando configuras las cosas, es normal tener una imagen negra o blanca
sample : set new serial number then save >>>>> ERR_EMPTY_RESPONSE or white page/ pagina blanca
It will be fine /todos bn
muestra: establezca un nuevo numero de serie y luego guarde >>>>> ERR_EMPTY_RESPONSE white page/ pagina blanca
It will be fine /todos bn
Estara bien
Then back to
luego de vuelta a
------------------------------------
IMPORTANT !
nb When you set Modem Type please set the next mac address
nb Cuando establezca el tipo de Modem, Configure a CONTINUACION la direccion mac
-------------------------------
nb Use set tuner type, pga and number of tuners just in case you try to add new modems-----Set Modem Type has automatic setup
nb Use el tipo de sintonizador establecido, la pga y el numero de sintonizadores en caso de que intente agregar nuevos modems ----- El tipo de modem establecido tiene configuracion automatica
NBB
Make sure you select the correct modem.
Don't select 8 channel modem from 4 channel modem, you will brick for sure
Asegúrese de seleccionar el módem correcto.
No seleccionará módem de 8 canales en módem de 4 canales, seguramente se bloqueará / brick
================================================== ======
ssh credential /win scp
root
dragon
------
----------------------------------------------------
snmpset/get/walk work as usual
snmpwalk -v2c -c xx xx.xx.xx.xx
snmpset -v2c -c xx xx.xx.xx.xx OID integer x
----------------------------------------------
Set Modem Type in configuration page , Make sure you change your Mac address , Set serial(optional) and reboot
================================================== ======
Configure el tipo de modem en la pagina de configuracion, asegurese de cambiar la direccion de su Mac, configure el serial (opcional) y reinicie
===============================
Use Clear_profile to back to original configuration modem
Use Clear_profile para volver al modem de configuracion original
==========================
Upload cert via WinScp/filezilla (cm_cert.cer cm_key_prv.bin) win scP
cm_cert.cer in /nvram/1/security
cm_key_prv.bin in /nvram/1/security
Rename cert / Renombre el cert modem cm_cert.cer y su llave privada como cm_key_prv.bin
==============
kill snmp command(Manually)
kill $(ps|grep [s]nmp|cut -c 1-5)
-------------------------
SOME COMMAND ALPHAWARE FROM SHEEL
FORCE NETWORK ACCESS
echo registered > /proc/net/dbrctl/mode
Set MaxCPE
cd proc/net/ cd dbrctl echo "20">maxcpe
Config location (From ISP Sample name cm-************ apr****** etc.. )
/var/tmp
Force Config location (Upload winScp filezilla etc)
/nvram/fw/configs/config.cm
Download Partition from ftp/winScp
ftp/WinScp 192.168.100.1 login/pass -- dev/ out mtdblock0 to 7
Certificate locations
CM Cert: /nvram/1/security/cm_cert.cer
CM Private Key: /nvram/1/security/cm_key_prv.bin
MFG Cert: /nvram/1/security/mfg_cert.cer
MFG Public Key: /nvram/1/security/mfg_key_pub.bin
Root key: /nvram/1/security/root_pub_key.bin
Cheers DragonLord
============================================
AlphaWare Commands
Another cool thing is AlphaWare hes the ability to use CLI commands, which is completely missing in forceWare. You will need to SSH into the modem first. If your ISP is weak, you can try forcing your own config by renaming a config you have to config.cm and placing it into the /nvram/fw/configs folder. Or you can get it from your ISP manually if you are online
Go to CLI
cli
See more commands
help
List all available docsis modules
cli docsis/listDocsisModules
Stop frequency scanning
cli docsis/scan 0
Clear HTTP logs (reboot required)
rm –rf /nvram/1/3
Ignore REG_RSP (reboot required)
cli docsis/Debug/SetDebugOption 18 1
Disable AES encryption (reboot required)
cli docsis/Debug/SetDebugOption 2 1
DNS Bypass
You may not want to use your ISP’s DNS servers after your modem is provisioned. You can change your DNS settings on your CPE to another service such as Google DNS or OpenDNS for diagnostic purposes:
GoogleDNS 8.8.8.8 OpenDNS 208.67.222.222
8.8.4.4 208.67.220.220
Setup FTP Server for AlphaWare
Since there is no FTP server inside AlphaWare, you need to setup a FTP server on your operating system to easily transfer files from and to AlphaWare. After you install something like FileZilla server, you can use the command to pull a config from your server:
cd /nvram/
wget
cp filename.cm config.cm (ignore if your file is already named config.cm
Or pull a new certificate and key:
cd /nvram/1/security
rm cm_cert.cer
rm cm_key_prv.bin
wget
wget password@localipaddressort/cm_key_prv.bin
================================================== ================================================== ================================================== ================================================== =======
================================================== ================================================== ================================================== ================================================== =======
FIRMWARE alphaware_REV8_PUMA5 BASED ON KOMODO 1.6.14
Firmware Alphaware rev8 version PUMA5
test it on sb6120/sb6121/sb6141/U10C035
------------------------------------
shh ssh credential
root
dragon
------
web credential
admin
dragon
== after you set the password you will have .......
dragon
password (your password)
---------------------------------------
Snmp spoof works it will automaticle start. Set which snmp you like auto or manual(set oids)
Simple use snmprealtime to spoof modem during Online
nb Manual snmp modem see the OIDS you set and choose Custom_Modem from realtimesnmp (compile for realtimesnmp )
auto snmp are a compiled OIDS
nbb On reboot modem will back on AUTO snmp
snmpset/get/walk work as usual
-----------------------------------------------------------------------------------------------------
NB you can add your home script in /nvram/console.sh
-----------------------------------------------------------------------------------------------------
nbb
Set Modem Type in configuration page ------------ Set serial and reboot
In case you mistake to select modem you may brick modem... there is a fix for it
Log in ssh and go in /sbin run ./WEBGUY.sh
If the guy will open, you will select the correct modem now
============
Establecer tipo de módem en la página de configuración ------------ Establecer serial y reiniciar
Nota: en caso de error al seleccionar el módem, puede bloquear el módem. Hay una solución para ello.
Inicie sesión en ssh y vaya a / sbin run ./WEBGUY.sh
se abrirá el webgui, seleccionarás el módem correcto ahora
====
Use Clear_profile to back to original configuration modem
Use Clear_profile para volver al módem de configuración original
-----------
nb in case of double firmware boot(put alwais AlphaWare on ubf2)
use comand setenv ACTIMAGE 1 or 2 to swap firmware or use webgui option
Upload cert via tftp -p -r cm_cert.cer 192.168.100.1 1069 in /nvram/fw/bpi
Rename cert / Renombre el cert modem fw_cert.cer y su llave privada como fw_key_prv.bin
Upload cert via WinScp/filezilla
==============
kill snmp command(Manually)
kill $(ps|grep [s]nmp|cut -c 1-5)
------------
nbb
Set Modem Type in configuration page ------------ Set serial and reboot
In case you mistake to select modem you may brick modem... there is a fix for it
Log in ssh and go in /sbin run ./WEBGUY.sh
If the guy will open, you will select the correct modem now
============
Establecer tipo de módem en la página de configuración ------------ Establecer serial y reiniciar
Nota: en caso de error al seleccionar el módem, puede bloquear el módem. Hay una solución para ello.
Inicie sesión en ssh y vaya a / sbin run ./WEBGUY.sh
se abrirá el webgui, seleccionarás el módem correcto ahora
---------
COMMAND ALPHAWARE FROM SHEEL
FORCE NETWORK ACCESS
echo registered > /proc/net/dbrctl/mode
How to TFTP the config file from isp (modem online)
cd /nvram/ tftp -g -r CONFIG_NAME.cm ISP_TFTP_IP
Double Firmware Working force/alpha alpha/alpha
Set MaxCPE
cd proc/net/ cd dbrctl echo "20">maxcpe
Config location (From ISP Sample name cm-************ apr****** etc.. )
/var/tmp
Force Config location (Upload winScp filezilla etc)
/nvram/fw/configs/config.cm
Download Partition from ftp/winScp
ftp/WinScp 192.168.100.1 login/pass -- dev/ out mtdblock0 to 7
Certificate locations
CM Cert: /nvram/1/security/cm_cert.cer
CM Private Key: /nvram/1/security/cm_key_prv.bin
MFG Cert: /nvram/1/security/mfg_cert.cer
MFG Public Key: /nvram/1/security/mfg_key_pub.bin
Root key: /nvram/1/security/root_pub_key.bin
Original Cert Locations (after dump it )
/nvram/Originals/security
Cheers DragonLord
Alphaware is the original work of DragonLord
Unauthorized copying and distribution of this firmware is prohibited
DragonLord CANNOT be held responsible for any malicious acts performed using this firmware
This firmware is a free download from Forocable forums and is free to distribute in an unmodified state and only when credit is given to DragonLord
You are FORBIDDEN to charge for this firmware, this includes selling it bundled with modems to make a profit unless you have a reseller licence for doing so
This firmware is an addon to the works of Motorola/Arris, who retain the copyright to the original code
By using this firmware you acknowledge you have read, and agree to be bound by the terms of use mentioned above. If you do not accept the terms of use you MUST remove this firmware from your modem immediately
Cheers Dragonlord
Última edición por Dragon_lord7791; 11/09/2023 a las 09:52
-
Gracias / Me Gusta - 41 Gracias, 25 Me Gusta, 4 Me Disgusta
team_full,
narso,
OGT777,
cardori29a,
JDavid22,
MasteRTriX,
tedepera,
yadev,
nickson,
Lestarts,
jeramy1time,
changuito06,
titoxpcu,
oscurito1,
Pichardo,
Robert0G,
OhJohnnyWhy,
wesk18,
lospolloshermanos,
pipis2q,
hlopez256,
sb_uncapper,
Chiquitin,
telephoneguy,
KCO,
morcego.chacal,
revelde,
chars,
dainguyen122061,
Brick,
jellohello,
kusagami,
Atorrez62,
zesarm,
juanhex,
Alvos,
Vantonyo,
patata1985,
qubanac,
rey150520,
ethics agradecido(s) por este post
OGT777,
sb5101e,
cardori29a,
MasteRTriX,
tedepera,
nickson,
changuito06,
jeramy1time,
Pichardo,
OhJohnnyWhy,
wesk18,
pipis2q,
sb_uncapper,
hlopez256,
oscurito1,
yadev,
downer11st,
dainguyen122061,
Brick,
kusagami,
zesarm,
Alvos,
morcego.chacal,
qubanac,
ethics le(s) gustó este post
-
-
Gracias / Me Gusta - 6 Gracias, 2 Me Gusta, 0 Me Disgusta
-
-
-
Gracias / Me Gusta - 0 Gracias, 1 Me Gusta, 0 Me Disgusta
-
-
Gracias / Me Gusta - 0 Gracias, 1 Me Gusta, 0 Me Disgusta
-
-
-
Gracias / Me Gusta - 0 Gracias, 1 Me Gusta, 0 Me Disgusta
-
- Poder de reputación
- 0
-
Gracias / Me Gusta - 0 Gracias, 1 Me Gusta, 0 Me Disgusta
-
Hola a todos
-
Gracias / Me Gusta - 0 Gracias, 1 Me Gusta, 0 Me Disgusta
-
-
Gracias / Me Gusta - 0 Gracias, 1 Me Gusta, 0 Me Disgusta
-
Gracias Dragon por tu aporte, checandolo....
-
Gracias / Me Gusta - 1 Gracias, 0 Me Gusta, 0 Me Disgusta
-
-
excelente
-
Gracias / Me Gusta - 0 Gracias, 1 Me Gusta, 0 Me Disgusta
-
-
Gracias / Me Gusta - 0 Gracias, 1 Me Gusta, 0 Me Disgusta
-
por tu aporte y tiempo
-
Gracias / Me Gusta - 4 Gracias, 2 Me Gusta, 0 Me Disgusta
-