-
Certs from SBG6580 via Telnet
Hey guys,
What are the commands to get the certs via telnet on a SBG6580?
Hola chicos ,
¿Cuáles son los comandos para conseguir los certs a través de Telnet en un SBG6580 ?
In telnet, all i see are the following:
[cm] [eRouter] [ethernet] [ftpLite] [gw] [pingHelper] [rip] [system] [tacacs]
[tr69] [wifi]
Última edición por geoneo; 15/08/2016 a las 16:32
-
hola yo he tratado mucho tiempo atras y nunca pude no se los bloques para leer me canse de tratar y nadie ayuda casi aqui ojala y algun alma caritativa nos dijera como hacerle
-
activaron el telnet con snmp?
-
What's up McAdams!
If I had SNMP access then I wouldn't need telnet. I would just get them via SNMP. Unless I'm missing something and telnet access is better.
-
What's the isp? It also depends on the firm. Sometimes gotta reflash to enable telnet. Coax unplugged i used snmset -v2c -c private IP 1.3.6.1.4.1.4413.2.2.2.1.1.1.4.0 i 1 log:admin - motorola and voila
-
TWC
SBG6580-6.5.2.0-GA-06-077-NOSH-NNDMN.p7.twc_signed
I have telnet access.
Remote baby, remote. Not at hand.
I don't have SNMP access to that IP.
- - - Updated - - -
I was able to get 3 certs but not the private key.
Someone was kind enough to give me the command diag readmem -s 4 -n 5838 0x83FA8B80 but I don't see the BPI and certs there. I need more direction.
-
Just sent you a PM. If you get snmp try snmpwalk -v2c -c public -P d -O n 192.168.100.1 1.3.6.1.4.1.4413.2.99.1 1 > cableDataPrivateMIBGroup.txt credits
-
Gracias / Me Gusta - 0 Gracias, 1 Me Gusta, 0 Me Disgusta
-
-
Do you had any luck, I also can get 3 certs only
-
estaa buscando
-
telnet access enable, How to do it?
-
Hi can someone help me combine all the file once pulled to insert onto another modem. Thank tou
-
first I would read everything on this site about snmp, from there you will find the answer to your question.
-
I have been looking most of the posts are in Spanish which I don’t understand. Can you point me in the right direction.
- - - Updated - - -
I have been looking but can’t understand much as I don’t understand Spanish. Can you point me in the right direction?
-
translate it to english with web brower plugin, that is how I do it.
-