ALPHAWARE REV9 CGNV2 - CGNV21 - CGN1000

**Dragon_lord7791** · 20/05/2023, 21:57

Please always use the modem in its original state before flashing with AlphaWare . Thank you

nb dragonlord7791 use kofi add me if you need,thankyu

Necesitas estar Registrado y Logueado para ver el contenido...

AlphaWare firmware version REV9

try it on cgnv2/cgnv21/cgn1000

AlphaWare supports automatic private moto key decryption

telnet open ! mso msopassword or cusadmin password or cusadmin mso

back to cli whit exit word

to enter Production type

cable
do
Pro
DRAGONLORD (password)

to enter to shell type
she (he will ask for password)
dragonlord

------------------------------------

Telnet credential (default enabled)

mso
msopassword

--------

telnet

change password user mso

passwd mso
Changing password for mso (type password)
(type again password)

login whit user mso and type the password you choose

--------

do the same thing for user app/cusadmin

---------------------------------------------------------------------------------------

web credential alphaware

admin
dragon

web credential hitron

mso msopassword
cusadmin password
cusadmin mso

nb if modem start whit rg mode.
To enable hitron webgui in rg mode in case web method fails(alphaware web gui restored after 15 minutes in case works)
do this:

enter via telnet whith credential mso
and type she then the password: msopassword

now type

1 killall lighttpd (alphaware)
2 S60web start (hitron web)
3 go to 192.168.100.1 mso msopassword or cusadmin password or cusadmin mso

to disable rg find Residential Gateway function and untick the option

now reboot....

If modem start in bridge mode to enable hitron webgui just go under modem setup and use this option

1 enable hitron bridge
2 hitron bridge web (192.168.100.1:81)

-------------------------------------------------- -------------------------------------------------

snmpset / snmpget / walk works as usual

-----------------------------------------------

Telnet server can be enable via webgui under tools (telnet server run in default mode i suggest to change password)

-------------

Forced config work s as usual full speed

-------------------------------------------------- -------------------------------------------------

Firmware updates should be done in via spi mode(i use blackcats usb) (402 flash chip (mtd6) ) (403 nvram chip) (mtd7) (both chip are spi w25q128bv)

Flash nvram.bin via web gui at your home risk

================================================== == ================================================== ==========

upload manually certs

Upload certificate via tftp -p -r fw_cert.cer 192.168.100.1 1069 in /nvram/fw/bpi
Upload certificate via tftp -p -r fw_key_prv.bin 192.168.100.1 1069 in /nvram/fw/bpi

reboot modem and mac will change automaticle (AUTOMAC)
-------------------------------------------------- -------------------------------------------------

Reference AlphaWare rev8 (Puma5 and Puma6) by other commands. Thanks

-------------------------------------------------- -------------------------------------------------- ---------

ALPHAWARE COMMAND FROM SHEEL

FORCE NETWORK ACCESS

echo registered > /proc/net/dbrctl/mode

How to TFTP the isp configuration file (online modem)

cd /nvram
tftp -g -r CONFIG_NAME.cm ISP_TFTP_IP

Set MaxCPE

cd proc/net/
cd dbrctl
echo "20">maxcpe

Configuration location (from ISP display name cm-************ apr****** etc.)

/var/tmp

Force configuration location (load winScp filezilla etc.)

/nvram/fw/configs

Certificate default locations

CM certificate: /nvram/1/security/cm_cert.cer
CM private key: /nvram/1/security/cm_key_prv.bin
mfg cert: /nvram/1/security/mfg_cert.cer
MFG Public Key: /nvram/1/security/mfg_key_pub.bin
Root key: /nvram/1/security/root_pub_key.bin

DragonLord greets you all and have a new year full of blessings

firmware will be availeble here

Necesitas estar Registrado y Logueado para ver el contenido...

Thankyu !