-
- Poder de reputación
- 0
your flashcat can't detect any of your 3 modems? something must be wrong with the pinouts or your flashcat. are they arris or motorola? flashcat has no trouble detecting motorola sb6141s and sb6120/1s.
the arris give me more problems so i just avoid those if i can. i've used flashcat to flash all my modems sb6120-6141
these are the pinouts i use, check blackcat user manual if you don't know your device pins:
Flashcat pin: chip pin:
pin1 vcc --> pin2 (3.3v) 5v if no detect, test 3.3v on pin1 then 5v on pin1 if pin2 fails to detect chip
pin2 SI --> pin8
pin3 SO --> pin15
pin4 SCLK --> pin16
pin5 CS --> pin7
pin6 GND -> pin10
on detect it should show the chip as MXIC MX25L640 on the SPI Flash tab in flashcat. shows different chip for sb6120 forgot the name
-
Gracias / Me Gusta - 1 Gracias, 0 Me Gusta, 0 Me Disgusta
-
- Poder de reputación
- 0
-
Gracias / Me Gusta - 1 Gracias, 0 Me Gusta, 0 Me Disgusta
pipis2q agradecido(s) por este post
-
Con fc alimentando solo el pin2 con 5v funciona perfectamente sin hacer isp. Revisa que todo esté conectado perfectamente. También baja la ultima versión de fc instala los drivers nuevos y flahea nuevamente el fc. Saludos
Enviado desde mi iPhone utilizando Tapatalk
-
Gracias / Me Gusta - 1 Gracias, 0 Me Gusta, 0 Me Disgusta
-
- Poder de reputación
- 0
Ya y ya y no me detecta
Enviado desde mi LG-H840 mediante Tapatalk
-
se batalla,con esas pinzas,pero si se puede suerte
-
Gracias / Me Gusta - 1 Gracias, 0 Me Gusta, 0 Me Disgusta
-
- Poder de reputación
- 0
why are you using a positive battery for red? i don't use any external power source to flash it, flashcat can apply 3.3v or 5v directly by way of pin1
in your case i'd plug that red line to pin1 on flashcat and pin2 on chip. also i use a pomona soic 16 pin clip, makes things easier
-
Gracias / Me Gusta - 0 Gracias, 1 Me Gusta, 0 Me Disgusta
-
- Poder de reputación
- 0
Will try that, but dont have that clip
Enviado desde mi LG-H840 mediante Tapatalk
-
Power on the modem first. Wait until online is blinking. Clip or plug in your device to the chip. Press DETECT button one time. You'll get an error. Unplug power then detect again. It should read chip ready to program after that
-
hola amigo y el sofware de donde lo puedo bajar .
-
-
-
-
-
Necesito un FULLDUN del 6141 ya modificado... ¿Alguien lo tiene?
Cuando pienses que no se puede...
Bueno, espera un poco y veraz que cambiarás de opinión.
-
- Poder de reputación
- 0
-