TG862 Mod Firmware and usbjtag xml: Enjoy!

[enorozco]

Necesitas estar Registrado y Logueado para ver el contenido...

Mira para poder echar a volar estos cacharros lo que nesesitas es un flasher ya se jtag nt o un bcusb y seguir el tutorial de conexionado de el sb6120 y cargarle la flash que subio el amigo arrobazo

[teodoromo]

tengo uno cer de un modem sb5120 pero estan en punto cer y key como se lo pongo al arris alguien q me ayude

[Fix]

Olá eu entendi a parte de como trocar os certs,mas para trocar o mac e serial não entendi,eu terei que executar o chserial and chmac scripts aonde ? seria no linux para trocar o mac e serial ?e os comando estão apagados.

[enorozco]

para preguntar a los que lo tienen jalando en su event log les aparece asi el forzado de config o eso no tiene nada q ver por que sigue sin querer forzar el config

1/18/2016 11:22	69010200	6	SW Download INIT - Via Config file
1/18/2016 11:22	69010500	4	SW upgrade Failed before download - File not Present
1/18/2016 11:22	69010600	4	SW upgrade Failed before download -TFTP Max Retry Exceeded

1/18/2016 11:59

65517

ConfigFile - BadParam

[niños69]

yo te ayudo mi

[Fix]

Necesitas estar Registrado y Logueado para ver el contenido...

ola amigo,gravei seu fulldump mas não consigo entrar no ssh me acusa o erro de senha,eu utilizei a senha pass: alpha101 o que está de errado ?

Necesitas estar Registrado y Logueado para ver el contenido...

[niños69]

1=root

2=alpha101

[Fix]

Necesitas estar Registrado y Logueado para ver el contenido...

thanks.

[Fix]

Olá amigos,não consigo subir os certs pelo tftpd32 e putty o que estou fazendo de errado ?

[verguesa]

para subir config por tftp32 es
cd /nvran/
tftp -g -r config.cm 192.168.0.2 o ip local del pc

[Alvos]

Excelente Aporte se te agradece!

[cassio_mal]

Necesitas estar Registrado y Logueado para ver el contenido...

pode recolocar pra download novamente :]:

[cassio_mal]

Necesitas estar Registrado y Logueado para ver el contenido...

tens la full dump ?

[arrobazo]

Necesitas estar Registrado y Logueado para ver el contenido...

aca esta full dump de ambas spi, top y botton

Necesitas estar Registrado y Logueado para ver el contenido...

[cassio_mal]

Necesitas estar Registrado y Logueado para ver el contenido...

Obrigado !!

- - - Updated - - -

Ajudar e muito bom entao la vai script para blackcat usb

#This is a script for SPI mode
MyDevice = "Arris TG862"


FwBase = 0x40000
FwSize = 0x7e0000
Fw1Base = 0x820000
Fw1Size = 0x7e0000
U-BootBase = 0x0
U-BootSize = 0x20000
NvBase = 0x7B0000
NvSize = 327680


t1 = Tab.Create(MyDevice)


Tab(t1).AddGroup("U-Boot",10,10,100,150)
Tab(t1).AddGroup("Firmware",110,10,100,150)
Tab(t1).AddGroup("Firmware1",210,10,100,150)
Tab(t1).AddGroup("Nvram",310,10,100,150)
Tab(t1).AddButton("ReadU-Boot","Read",20,42)
Tab(t1).AddButton("WriteU-Boot","Write",20,102)
Tab(t1).AddButton("ReadFirmware","Read",120,42)
Tab(t1).AddButton("WriteFirmware","Write",120,102)
Tab(t1).AddButton("ReadFirmware1","Read",220,42)
Tab(t1).AddButton("WriteFirmware1","Write",220,102 )
Tab(t1).AddButton("ReadNvram","Read",320,42)
Tab(t1).AddButton("WriteNvram","Write",320,102)


CreateEvent(ReadU-Boot)
Status("Reading the U-Boot")
Tab(t1).ButtonDisable()
MyData = Memory.ReadVerify(U-BootBase,U-BootSize)
if (MyData = Nothing)
Status("Error: data read back failed")
Tab(t1).ButtonEnable()
Exit Event
endif
Prompt = "Choose filename to save the firmware"
SaveFile(MyData,Prompt,"U-Boot.bin")
Status("Successfully read U-Boot from Flash")
Tab(t1).ButtonEnable()
EndEvent


CreateEvent(WriteU-Boot)
Tab(t1).ButtonDisable()
Prompt = "Choose a U-Boot to write into Flash"
MyData = OpenFile(Prompt,"U-Boot files (*.bin)|*.bin")
if (MyData = Nothing)
goto WriteU-BootExit
endif
if not (Len(MyData) = U-BootSize)
Status("Error: File is not the size of the U-Boot")
goto WriteU-BootExit
endif
Memory.Write(MyData,U-BootBase,U-BootSize)
Status("New U-Boot successfully written")
WriteU-BootExit:
Tab(t1).ButtonEnable()
EndEvent


CreateEvent(ReadFirmware)
Status("Saving the Arris tm802g's Firmware")
Tab(t1).ButtonDisable()
MyData = Memory.ReadVerify(FwBase,FwSize)
if (MyData = Nothing)
Status("Error: data read back failed")
Tab(t1).ButtonEnable()
Exit Event
endif
Prompt = "Choose filename to save the firmware"
SaveFile(MyData,Prompt,"tm802g.bin")
Status("Successfully read firmware from Flash")
Tab(t1).ButtonEnable()
EndEvent


CreateEvent(WriteFirmware)
Status("Programming the Arris tm802g's Firmware")
Tab(t1).ButtonDisable()
Prompt = "Choose a firmware to install"
MyData = OpenFile(Prompt,"Firmware files (*.bin,*.p7)|*.bin;*.p7")
if (MyData = Nothing)
WriteErr = "User cancelled opperation"
goto ExitWriteFwErr
endif
If (HWORD(MyData,0) = 12418) #Remove header if .p7 fw
Writeline("Removing .p7 firmware header")
HeadLen = HWORD(MyData,2) + 52 #increases Headlen by 7
NewLen = Len(MyData) - HeadLen
Resize(MyData,HeadLen,NewLen) #Removes the p7 header
endif
If not (HWORD(MyData,0) = 0x2705)
Status("Error: File does not appear to be compatible firmware")
exit event
endif
FwLen = Len(MyData)
Memory.Write(MyData,FwBase,FwLen)
FwSize = FwLen
Status("New firmware successfully installed")
Tab(t1).ButtonEnable()
Exit
ExitWriteFwErr:
Status(WriteErr)
Tab(t1).ButtonEnable()
EndEvent


CreateEvent(ReadFirmware1)
Status("Saving the Arris tm802g's Firmware")
Tab(t1).ButtonDisable()
MyData = Memory.ReadVerify(Fw1Base,Fw1Size)
if (MyData = Nothing)
Status("Error: data read back failed")
Tab(t1).ButtonEnable()
Exit Event
endif
Prompt = "Choose filename to save the firmware"
SaveFile(MyData,Prompt,"tm802g_1.bin")
Status("Successfully read firmware1 from Flash")
Tab(t1).ButtonEnable()
EndEvent


CreateEvent(WriteFirmware1)
Status("Programming the Arris tm802g's Firmware")
Tab(t1).ButtonDisable()
Prompt = "Choose a firmware to install"
MyData = OpenFile(Prompt,"Firmware files (*.bin,*.p7)|*.bin;*.p7")
if (MyData = Nothing)
WriteErr = "User cancelled opperation"
goto ExitWriteFwErr
endif
If (HWORD(MyData,0) = 12418) #Remove header if .p7 fw
Writeline("Removing .p7 firmware header")
HeadLen = HWORD(MyData,2) + 52 #increases Headlen by 7
NewLen = Len(MyData) - HeadLen
Resize(MyData,HeadLen,NewLen) #Removes the p7 header
endif
If not (HWORD(MyData,0) = 0x2705)
Status("Error: File does not appear to be compatible firmware")
exit event
endif
FwLen = Len(MyData)
Memory.Write(MyData,Fw1Base,FwLen)
Fw1Size = FwLen
Status("New firmware successfully installed")
Tab(t1).ButtonEnable()
Exit
ExitWriteFwErr:
Status(WriteErr)
Tab(t1).ButtonEnable()
EndEvent


CreateEvent(ReadNVRAM)
Status("Reading the NVRAM")
Tab(t1).ButtonDisable()
MyData = Memory.ReadVerify(NvBase,NvSize)
if (MyData = Nothing)
Status("Error: data read back failed")
Tab(t1).ButtonEnable()
Exit Event
endif
Prompt = "Choose filename to save the firmware"
SaveFile(MyData,Prompt,"NVRAM.bin")
Status("Successfully read NVRAM from Flash")
Tab(t1).ButtonEnable()
EndEvent


CreateEvent(WriteNVRAM)
Status("Programming the NVRAM")
Tab(t1).ButtonDisable()
Prompt = "Choose a firmware to install"
MyData = OpenFile(Prompt,"Firmware files (*.bin,*.p7)|*.bin;*.p7")
if (MyData = Nothing)
WriteErr = "User cancelled opperation"
goto ExitWriteFwErr
endif
NvLen = Len(MyData)
Memory.Write(MyData,NvBase,NvLen)
NvSize = NvLen
Status("New NVRAM successfully installed")
Tab(t1).ButtonEnable()
Exit
ExitWriteFwErr:
Status(WriteErr)
Tab(t1).ButtonEnable()


EndEvent