Sacar certificados de BPI o NVSETTING

[duna]

Necesitas estar Registrado y Logueado para ver el contenido...

Para bpi.bin lo puedes hace a manija con un editor hex o con la plantilla siempre ke tengas el bpi.bin con los tamaños = en los campos de la platilla borras todos los hex y pegas los ke te interesa, si sabes hacerlo es facil.
Para el perm entero usa mejor cmnonexp.exe

[duna]

Necesitas estar Registrado y Logueado para ver el contenido...

Con cmnonexp.exe puedes ver varios grupos
Una plantilla de perm entero es complicado ya ke varian los offset y no tiene la opcion de buscar para saltar a ese offset
Pero para alguien ke sepa de programacion no tiene ke ser muy complicado hacer una tool

[zeus197631]

tengo tiempo y he posteado a ver quien me facilita la plantilla de winhex del amigo duna y nada no he conseguido respuesta...

[discarted]

si no puedes por el metodo print convertirlos pasamelo el txt con los 5 certificados en txt y yo t los convierto en .bin para subirselos ahaxorware te los tengo en 5 min o menos

[Carlos Limon Gallardo]

despues de rato buscar lo encontre

[skipmack46]

thanks

[sb5101e]

study hard

[Roberth Hdz]

Thanks

[FLKRISTIAN]

Buen aporte tks.

[paradise327]

Thank You

[QUOTE = yoluluc; 337137] Okay, let's collect disseminated information.

I explain how to get the 5 certificates from the BPI.bin.
Procedure:
1. We open the BPI.bin with Winhex.
2. We apply the WPI group raw data template from friend Duna.

Necesitas estar Registrado y Logueado para ver el contenido...

To add it, copy the content of the txt in view-template manager. New -Save

Let's continue, apply the template and select and copy the certificate data that we want to get.

Next, from Winhex itself, we go to Edit-Clipboard-Paste in a new file.
We select ASCII Hex and we give it to save.

We save it according to the certificate that corresponds with its extension .cert or. key (pliblic.key CA.cer… ..)


Option 2. Using the Convercerti We

select and copy the data of the certificate in question according to the application of the BPI template.

In this case we will use the Ultraedit tool.

Open the Ultraedit and paste the copied data. Next we go to the Search-replace tab.
In search by: we put a space
Replace with: nothing.

We give you replace everything, and we already have the data without spaces.

Then we copy the data and paste it into the Convercerti, we choose the certificate in question according to the data we have put in and we give it to apply.
We will generate the certificates in .cer and .key format.



Convert the certificates obtained through the print method.
We copy the data of the certificate in question in Ultraedit.

With Alt pressed we select only the part of numbers that is to say the 4 columns. No spaces at the beginning or end of the columns.

Right button copy.

We open Winhex and go to Edit-Clipboard-Paste in a new file.
We select ASCII Hex.

Depending on the type of certificate, we save it with its corresponding extension .cer or .key

Repeat this action in the certificates we want to obtain.

a greeting

PD would only need a nvsetting template to extract the data (serial number and Mac included), if you need the oofset from where they are, you just have to ask for it. [/ QUOTE]

[Sansol84]

alguien necesita c3rt5 para cali ?

[tuti22]

muchas

[erick_bol13]

can i try this

[kwapster]

Thanks

[linxijun]

Thanks !!!!!!!!!!!!!!!!!!!!!!!!!!!!