-
-
Bueno, muchas por el tuto, ya le puse el ambit, le cambie la MAC y nada... no se conecta ... la luz de cable nunca queda encendida, loguea esto permanentemente:
CM/NonVol/CM DOCSIS NonVol> Logging event: Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 timeout
Non-Vol Settings successfully written to the device.
Scanning DS Channel at 6030000 Hz... (Initial target freq)
Non-Vol Settings successfully written to the device.
Scanning DS Channel at 6030000 Hz...
Scanning DS Channel at 609000000 Hz...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 609000000 Hz
Carrier Offset = -13 Hz
Symbol rate = 5360537 sym/sec
SNR = 37 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x14113810
Power Level = 5 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM/NonVol/CM DOCSIS NonVol> Logging event: No Ranging Response received - T3 time-out
Logging event: No Ranging Response received - T3 time-out
RNG-RSP Adj: tim=1244 power=16 freq=0 Stat=Continue
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success
******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 10
Upstream Frequency = 25400000 Hz
Upstream Power = 51 dBmV
Ranging SID = 0x48d
Upstream Symbol Rate = 5120000 sym/sec
******************************************
Starting IP Initialization with DHCP...
CM/NonVol/CM DOCSIS NonVol> Logging event: DHCP FAILED - Discover sent, no offer received
Logging event: DHCP FAILED - Discover sent, no offer received
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 timeout
Non-Vol Settings successfully written to the device.
Scanning DS Channel at 6030000 Hz...
Scanning DS Channel at 615000000 Hz...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 615000000 Hz
Carrier Offset = -13 Hz
Symbol rate = 5360537 sym/sec
SNR = 37 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x142f5a1c
Power Level = 5 dB
QAM = LOCKED
FEC = LOCKED
******************************************
Non-Vol Settings successfully written to the device.
CM/NonVol/CM DOCSIS NonVol> Logging event: No Ranging Response received - T3 time-out
Logging event: No Ranging Response received - T3 time-out
RNG-RSP Adj: tim=1243 power=16 freq=0 Stat=Continue
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success
******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 10
Upstream Frequency = 25400000 Hz
Upstream Power = 51 dBmV
Ranging SID = 0x48e
Upstream Symbol Rate = 5120000 sym/sec
******************************************
Starting IP Initialization with DHCP...
CM/NonVol/CM DOCSIS NonVol> Logging event: DHCP FAILED - Discover sent, no offer received
Logging event: DHCP FAILED - Discover sent, no offer received
Logging event: DHCP FAILED - Discover sent, no offer received
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 timeout
Non-Vol Settings successfully written to the device.
Scanning DS Channel at 6030000 Hz...
Scanning DS Channel at 621000000 Hz...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 621000000 Hz
Carrier Offset = -13 Hz
Symbol rate = 5360537 sym/sec
SNR = 36 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x13ee4395
Power Level = 6 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM/NonVol/CM DOCSIS NonVol> Logging event: No Ranging Response received - T3 time-out
Logging event: No Ranging Response received - T3 time-out
RNG-RSP Adj: tim=1238 power=16 freq=0 Stat=Continue
RNG-RSP Adj: tim=0 power=1 freq=0 Stat=Continue
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success
******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 10
Upstream Frequency = 25400000 Hz
Upstream Power = 51 dBmV
Ranging SID = 0x48f
Upstream Symbol Rate = 5120000 sym/sec
******************************************
Starting IP Initialization with DHCP...
CM/NonVol/CM DOCSIS NonVol> Logging event: DHCP FAILED - Discover sent, no offer received
Logging event: DHCP FAILED - Discover sent, no offer received
Logging event: DHCP FAILED - Discover sent, no offer receivedLogging event: DHCP FAILED - Discover sent, no offer received
Logging event: Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 timeout
Non-Vol Settings successfully written to the device.
Scanning DS Channel at 6030000 Hz...
Scanning DS Channel at 627000000 Hz...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 627000000 Hz
Carrier Offset = -13 Hz
Symbol rate = 5360537 sym/sec
SNR = 35 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x14613687
Power Level = 4 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM/NonVol/CM DOCSIS NonVol> Logging event: DHCP FAILED - Discover sent, no offer receivedLogging event: No UCD's Received - Timeout
Non-Vol Settings successfully written to the device.
Scanning DS Channel at 6030000 Hz...
Scanning DS Channel at 633000000 Hz...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 633000000 Hz
Carrier Offset = -14 Hz
Symbol rate = 5360537 sym/sec
SNR = 34 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x144713f7
Power Level = 4 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM/NonVol/CM DOCSIS NonVol> Logging event: DHCP FAILED - Discover sent, no offer receivedLogging event: No UCD's Received - Timeout
Non-Vol Settings successfully written to the device.
Scanning DS Channel at 6030000 Hz...
Scanning DS Channel at 639000000 Hz...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 639000000 Hz
Carrier Offset = -14 Hz
Symbol rate = 5360537 sym/sec
SNR = 37 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x141c620c
Power Level = 5 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM/NonVol/CM DOCSIS NonVol> Logging event: DHCP FAILED - Discover sent, no offer receivedLogging event: No UCD's Received - Timeout
Non-Vol Settings successfully written to the device.
Scanning DS Channel at 6030000 Hz...
Scanning DS Channel at 645000000 Hz...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 645000000 Hz
Carrier Offset = -14 Hz
Symbol rate = 5360537 sym/sec
SNR = 35 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x14399be7
Power Level = 5 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM/NonVol/CM DOCSIS NonVol> Logging event: DHCP FAILED - Discover sent, no offer receivedLogging event: No UCD's Received - Timeout
Non-Vol Settings successfully written to the device.
Scanning DS Channel at 6030000 Hz...
Scanning DS Channel at 651000000 Hz...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 651000000 Hz
Carrier Offset = -14 Hz
Symbol rate = 5360537 sym/sec
SNR = 35 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x1435e76c
Power Level = 5 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM/NonVol/CM DOCSIS NonVol> Logging event: DHCP FAILED - Discover sent, no offer receivedLogging event: No UCD's Received - Timeout
Non-Vol Settings successfully written to the device.
Scanning DS Channel at 6030000 Hz...
Scanning DS Channel at 657000000 Hz...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 657000000 Hz
Carrier Offset = -15 Hz
Symbol rate = 5360537 sym/sec
SNR = 36 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x14389810
Power Level = 5 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM/NonVol/CM DOCSIS NonVol> Logging event: DHCP FAILED - Discover sent, no offer receivedLogging event: No UCD's Received - Timeout
Non-Vol Settings successfully written to the device.
Scanning DS Channel at 6030000 Hz...
Scanning DS Channel at 663000000 Hz...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 663000000 Hz
Carrier Offset = -15 Hz
Symbol rate = 5360537 sym/sec
SNR = 36 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x1437dae1
Power Level = 5 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM/NonVol/CM DOCSIS NonVol> Logging event: DHCP FAILED - Discover sent, no offer receivedLogging event: No UCD's Received - Timeout
Non-Vol Settings successfully written to the device.
Scanning DS Channel at 6030000 Hz...
Scanning DS Channel at 669000000 Hz...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 669000000 Hz
Carrier Offset = -15 Hz
Symbol rate = 5360537 sym/sec
SNR = 35 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x1436f872
Power Level = 5 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM/NonVol/CM DOCSIS NonVol> Logging event: DHCP FAILED - Discover sent, no offer receivedLogging event: No UCD's Received - Timeout
Non-Vol Settings successfully written to the device.
Scanning DS Channel at 6030000 Hz...
Scanning DS Channel at 675000000 Hz...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 675000000 Hz
Carrier Offset = -15 Hz
Symbol rate = 5360537 sym/sec
SNR = 35 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x14258fbe
Power Level = 5 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM/NonVol/CM DOCSIS NonVol> Logging event: DHCP FAILED - Discover sent, no offer receivedLogging event: No UCD's Received - Timeout
Non-Vol Settings successfully written to the device.
Scanning DS Channel at 6030000 Hz...
Scanning DS Channel at 681000000 Hz...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 681000000 Hz
Carrier Offset = -16 Hz
Symbol rate = 5360537 sym/sec
SNR = 36 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x1414045a
Power Level = 5 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM/NonVol/CM DOCSIS NonVol> Logging event: DHCP FAILED - Discover sent, no offer receivedLogging event: No UCD's Received - Timeout
Non-Vol Settings successfully written to the device.
Scanning DS Channel at 6030000 Hz...
Scanning DS Channel at 687000000 Hz...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 687000000 Hz
Carrier Offset = -17 Hz
Symbol rate = 5360537 sym/sec
SNR = 38 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x13cde9db
Power Level = 6 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM/NonVol/CM DOCSIS NonVol> Logging event: DHCP FAILED - Discover sent, no offer receivedLogging event: No UCD's Received - Timeout
Quisiera saberque estoy haciendo mal, para mi es un problema de certificados por que no se los puse, como puedo hacer para sacarlos de un motorola 5101 y ponerselos a esta DPC2001R2 con Ambit 250 ???
-
Gracias / Me Gusta - 1 Gracias, 0 Me Gusta, 0 Me Disgusta
N/A agradecido(s) por este post
-
-
Buenas gente no se si se puedo postear esta consulta aca pero necesito ayuda. HAce mil no toco un modem y la verdad es como que ya me olvide ciertas cosas. Yo venia bien con el tema clonacion del config file. lo sacaba de un original y lo ponia en otro y todo ok en dos segundos. Pero ultimamente me puse a intentar pasar algunas configs a otros modems precisamente los webstar 2100r2 y nada se me mueren de una. Quedan solo una luz encendida.
ALguien me puede recordar si es necesario que los chips de las flash sean los mismos o eso no tenia nada que ver mientras sean chipset broadcom 3349? el flash si es MX AMD Spansion , Samsung etc etc eso influye? la verdad ahora tengo unos 15 modems nuevos si uso pero tienen flash samsung les quiero poner una config de otro 2100 y chau mueren. Tengo otros tantos ahi muertos y con jtag utility no logro revivirlos. ,,, Buen les agradecere su ayuda. Tam bien me gustaria alguien que me de una mano con los nuevos Motorola 6850 y los arris 6850. Cisco 3825 y motorola 901. Esos no tengo ni idea como clonarlos. Mil a quien tenga tiempo y ganas de ayudarme. Sdos para todos los del foro.
-
hola que tal, mira hasta donde se los config no hay dramas yo los pongo en otros modems y cero drama, sino intenta ponerles haxorware y listo no renegar le cargas cualquier config. con respecto a los nuevos, vas a necesitar un usbjtag o blackcat usb.No se en donde estas, pero si estas cerca de rosario yo tengo y si queres te doy una mano.
Saludos
-
El 3825 por lo que leí Creo que necesitas leer un chip que esta abajo del dicipador de calor y hacer un puente a una resistencia
Enviado desde mi iPhone utilizando Tapatalk
-
tem que mudar da flash? e colocar a 5101 eo bootload tambem?aonde eu acho esse arquivos para mudar?
-
Amigos yo no se nada de programacion y les pido ayuda para poder hacer hack a mi cable modem Scientific Atlanta 2100
-
a leer un poco el foro y a familiarizarte con los terminos asi entendes un poco de lo que hablamos.
-
voy a probar.
.
-
Alias el
Mario KillerPR #1
-
-