-
Snmp v3!!
For those of you who want to make the most out of the SNMP network scanning - I would like to forward all of your attention to an open source command line tool for snmp queries you can use to learn a lot about your devices and then configure SysAid to extract and save that information.
This net-snmp tool will allow you to be able to send simple queries to your SNMP devices and receive the values.
Learn more about the tool
Download the third link on the above download page or click this direct link :
Perform a default installation – next next….
Open a command line prompt in Windows: (cmd)
The following command lines are usefull:
Get value of a single OID:
snmpget -v1 -c public OID
Example : snmpget -v1 -c public 192.168.1.1 1.3.6.1.2.1.43.5.1.1.1.1.0
Get all values of a sub tree:
snmpwalk -v 1 -c public mib-2
snmpwalk -v 1 -c public private
snmpwalk -v 1 -c public mgmt
The outputs are long so you can add "> file1.txt" to the end of each command : snmpwalk -v 1 -c public mgmt > mgmt.txt
If you find OID-s of interesting information for printers like page counter , toner level , or any other interesting information for network devices – please post them here !
Good Luck !risas
-
Gracias / Me Gusta - 8 Gracias, 3 Me Gusta, 0 Me Disgusta
-
Thanks....
Let's see how this thing works.
-
Gracias / Me Gusta - 1 Gracias, 0 Me Gusta, 0 Me Disgusta
-
Can I use a tool like snmp or ip full view to connect remotely to another modem in my neighborhood and extract the certs this way?
-
Gracias / Me Gusta - 2 Gracias, 1 Me Gusta, 0 Me Disgusta
-
Maybe who knows ..give a try
Sent from my SAMSUNG-SGH-I337 using Tapatalk
-
Gracias / Me Gusta - 1 Gracias, 1 Me Gusta, 0 Me Disgusta
Quetal agradecido(s) por este post
-
It worked
I got the private string from my config, used supersnmp0.0.10 to do a scan with the private string, got some info on some modems with this scan... Now I used that info (IP, Modem version, etc) with snmp and managed to get the bpi.bin from a WebStar modem
Now I want to know, what is the snmp command to turn off Factory mode on a WebStar DPC2100r2 router?
Última edición por ricktendo; 16/06/2014 a las 07:13
-
Gracias / Me Gusta - 3 Gracias, 1 Me Gusta, 0 Me Disgusta
-
Ok ricktendo pm so I can help you.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
-
-
-
-
-
-
-
-
-
-